نوع مقاله : مقاله کامل پژوهشی
نویسندگان
1 دانشجوی کارشناسی ارشد، دانشگاه صنعتی امیرکبیر، دانشکده مهندسی پزشکی
2 دانشجوی کارشناسی، دانشگاه صنعتی امیرکبیر، دانشکده مهندسی پزشکی
3 دانشیار دانشکده مهندسی پزشکی، دانشگاه صنعتی امیرکبیر
چکیده
بیماریهای شریان کرونری یکیاز عوامل اصلی مرگومیر است. وقتیکه این شریان دچار انسداد شود، عمل بایپس شریان کرونری صورت میگیرد. استفاده از ورید سافینوس انسان درین جرّاحی، مورد توجه پژوهشگران است. درین مطالعه، نمونههای انسانی ورید سافینوس به وسیلهی یک دستگاه تست تورم، تحت آزمایش تورم قرار گرفت. انبساط نمونهها به عنوان ورودی یک روش محاسباتی مورد بررسی قرار گرفت. در مدلسازی عددی بافت به صورت یک مادهی جامد همگن، همسانگرد و اِلاستیک در نظر گرفته شد. خروجی مدل، مدول یانگ بافت است. نتایج نشان داد که مدول ورید سافینوس به صورت خطی با فشار انبساطی افزایش مییابد. هرچند که فرضیههای سادهی سازانهای درین مطالعه استفاده شد، ولی به دلیل ارائهی یک دید کلّی در رابطه با خواص مکانیکی بافت، ورید سافینوس انسان میتواند مفید بوده و زمینهای برای مطالعههای بیشتر و دقیقتر باشد.
کلیدواژهها
موضوعات
عنوان مقاله [English]
Measurement of mechanical properties of human saphenous vein using an inflation experiment
نویسندگان [English]
- Farzad Forouzandeh 1
- Mahdie Haji-Bozorgi 2
- Behrooz Meshkat 1
- Nasser Fatouraee 3
1 M.Sc Student, Faculty of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran
2 B.Sc Student, Faculty of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran
3 Associate Professor, Faculty of Biomedical Engineering, Amirkabir University of Technology, Tehran, Iran
چکیده [English]
Coronary Artery Diseases are one of the main reasonsof mortality. When these arteries occlude, usually a CoronaryArtery Bypass Graft (CABG) surgery is performed. Sine humanSaphenous Veins (SV) is used for CABG, they are of interest forresearchers. In this study human SV samples undergo inflationtest, using an inflation test device. Displacements of the samplesfor different pressures are analyzed, and average values are usedas input of a computational method. In the numerical simulationthe tissue is assumed as an elastic, isotropic, and homogenoussolid material, and its output is Young’s Modulus (E) ofthetissue. Results show that E of the SV increases linearly with thedistension pressure. Although simplifications were applied in thisstudy, it can be helpful for giving a basic insight aboutmechanical properties of human Saphenous Vein, which can befollowed by more realistic studies in the future.
کلیدواژهها [English]
- Saphenous Vein
- Inflation method
- Young’s Modulus
- Computational method