نوع مقاله : مقاله کامل پژوهشی
نویسندگان
1 مدرس، دانشکده فنی، دانشگاه آزاد اسلامی واحد شاهرود
2 استادیار، پژوهشکده سرامیک، پژوهشگاه مواد و انرژی
چکیده
در این پژوهش پودرهای هیدروکسی آپاتیت (HA)، فلوئورهیدروکسی آپاتیت (FHA) و فلوئورآپاتیت (FA) در ابعاد نانومتری با روش سل- ژل سنتز شدند. این پودرها قابلیت استفاده بالقوه در ترمیم استخوان و دندان را دارند. نیترات کلسیم آبدار [Ca(NO3)2, 4H2O MERK] و تری اتیل فسفیت [TEP, (C2H5O) 3P MERK)] به عنوان پیش ماده در اتانل استفاده شدند. برای دست یابی به مقدار استوکیومتری Ca/P برابر با 1.67، محلول TEP به صورت قطره قطره به محلول نیترات کلسیم آماده شده، اضافه شد. پس از پیرسازی و خشک نمودن نمونه ها، عملیات حرارتی در دمای 550oC انجام شد. آمونیوم فلوراید نیز به منظور تامین فلوئور برای دست یابی به فلوئورهیدروکسی آپاتیت و فلوئورآپاتیت به محلول اضافه شد. تغییرات ساختاری، ریخت شناسی پودر، تغییرات شیمیایی و آنالیز فازی و همچنین رفتار In vitro پودر به وسیله طیف سنجی مادون قرمز (FTIR)، میکروسکوپ الکترونی روبشی (SEM)، میکروسکوپ الکترونی عبوری (TEM)، آنالیز پراش اشعه ایکس (XRD)، دستگاه زتاسایزر (DLS) و آزمایش کشت سلولی مورد بررسی قرار گرفتند. نتایج مطالعات XRD و FTIR نشان دهنده ایجاد ترکیبات آپاتیت در همه نمونه هاست. بر اساس نتایج XRD با افزایش مقدار پیش ماده دهنده فلوئور درصد فاز فلوئورآپاتیت، درجه بلورینگی و اندازه بلورک ها افزایش یافت. آزمایش FTIR نشان دهنده جانشین شدن F- در موقعیت های یون OH- و تشکیل فلوئورهیدروکسی آپاتیت یا فلوئورآپاتیت خالص است. نتایج تحلیل SEM نیز بیانگر این است که با افزایش میزان فلوئور، تمایل به توده ای شدن پودر بیشتر شده است. اندازه ذرات پودر اندازه گیری شده با دستگاه زتاسایزر در نمونه های مختلف پودر در محدوده 100 nm تاnm 160 است. الگوی پراش به دست آمده در مطالعات TEM نشان می دهد که با افزایش یون فلوراید، درجه بلوری و اندازه بلورک ها تا اندازه ای افزایش داشته است. اندازه گیری مستقیم ابعاد بلورک ها در مشاهدات TEM، مقادیری در محدوده 20 nm تا 50 nm را نشان می دهد. نمونه های دارای مقادیر بیشتر فلوئور آپاتیت، به افزایش تعداد سلول ها در آزمایش کشت سلول های فیبروبلاست منجر شدند. این امر بیانگر اثر مثبت افزودن فلوئور بر رشد سلول ها و زیست سازگاری پودر فلوئورهیدروکسی آپاتیت است.
کلیدواژهها
موضوعات
عنوان مقاله [English]
Synthesis And Characterization Of Sol-Gel Derived Hydroxyapatite, Fluor-Hydroxyapatite And Fluor Apatite Nano Powders
نویسندگان [English]
- Babak Farsadzadeh 1
- Ali Asghar Behnamghader 2
- Sedighe Joughedust 1
1 Instructor, Engineering School, Shahrood Branch, Islamic Azad University
2 Assistant Professor, Biomaterial Group, Materials and Energy Research Center
چکیده [English]
In this study hydroxyapatite (HA), flour-hydroxyapatite (FHA) and fluorapatite (FA) nanopowders synthesized by sol-gel route. Theses powders are used as biocompatible materials for bone replacement and teeth restoration. Ammonium fluoride (NH4F MERK), calcium nitrate [Ca(NO3)2,4H2O MERK] and triethyl phosphite [TEP, (C2H5O) 3P MERK)] were used as F, Ca and P precursors respectively. Triethyl phosphite was first hydrolyzed in ethanol with a small amount of distilled water. To prepare FHA and FA, an appropriate amount of the NH4F powder was added directly to TEP solution. The appropriate amounts of TEP solution was added dropwise to the calcium nitrate solution to yield a stoichiometric ratio of Ca/P=1.67. The resulted solution stirred for 1 h and aged at 25°C for 24 h and 40°C for 72h afterward. After oven drying at 80°C, the powder samples were heat-treated at 550°C for 1 h in air. Microstructural characteristics, powder morphology, chemical structure and phase analysis and in vitro study were performed by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR), Zetasizer instrument and cell culture method. Fluoride-substituted hydroxyapatite powders (FHA) and Fluor apatite (FA) were successfully fabricated via a sol–gel technique with the incorporation of different levels of fluoride ions. Nearly complete substitution of the OH¯ by F¯ occurred with heat treatment, which was confirmed by FTIR analysis. The particle size distribution of powders evaluated by a zeta-sizer instrument was 100-160nm. The XRD results showed that the crystal size of powders is 20-50nm. The phase stability and crystallinity were different depending on the level of fluoride substitution. Moreover, the crystallinity and crystallite size of the powders increased with fluoride substitution. These improvements in the crystallization and phase stability of the apatite structure, resulting from the fluoride substitution via the sol– gel process, suggest enhanced performance of the FHA powders. The cellular response to the HA, FHA and FA powder was assessed by an in vitro culture method using fibroblastic L929 cells. After culturing for 3 days, the results showed that the number of cells increased with increasing fluoride substitution.
کلیدواژهها [English]
- Hydroxyapatite
- Fluor-Hydroxyapatite
- Fluor Apatite
- Nano powder
- Sol-gel