Biomechanics of Bone / Bone Biomechanics
Mohammad Nikkhoo; Mohammad Haghpanahi; J. L. Wang; Mohammad Parnianpour
Volume 5, Issue 1 , June 2011, , Pages 21-32
Abstract
Prediction of the relationship between different types of mechanical loading and the failure of the intervertebral disc is so important to identify the risk factors which are difficult to study in vivo and in vitro. On the basis of finite element methods some of these issues may be overcome ...
Read More
Prediction of the relationship between different types of mechanical loading and the failure of the intervertebral disc is so important to identify the risk factors which are difficult to study in vivo and in vitro. On the basis of finite element methods some of these issues may be overcome enabling more detailed assessment of the biomechanical behavior of the intervertebral disc. The objective of this paper is to develop a nonlinear axisymmetric poroelastic finite element model of lumbar motion segment and show its capability for studying the time-dependent response of disc. After comparison of the response of different models in quasi-static analysis, the poroelastic model of intervertebral disc is presented and the results of short-term, long-term creep tests and cyclic loading were investigated. The results of the poroelastic model are in agreement with experimental ones reported in the literature. Hence, this model can be used to study how different dynamic loading regimes are important as risk factors for initiation of intervertebral disc degeneration.
Cardiovascular Biomechanics
Hamed Khalesi; Hanie Niroomand Oscuii; Farzan Ghalichi
Volume 5, Issue 2 , June 2011, , Pages 143-149
Abstract
Prediction of the relationship between different types of mechanical loading and the failure of the intervertebral disc is so important to identify the risk factors which are difficult to study in vivo and in vitro. On the basis of finite element methods some of these issues may be overcome enabling ...
Read More
Prediction of the relationship between different types of mechanical loading and the failure of the intervertebral disc is so important to identify the risk factors which are difficult to study in vivo and in vitro. On the basis of finite element methods some of these issues may be overcome enabling more detailed assessment of the biomechanical behavior of the intervertebral disc. The objective of this paper is to develop a nonlinear axisymmetric poroelastic finite element model of lumbar motion segment and show its capability for studying the time-dependent response of disc. After comparison of the response of different models in quasi-static analysis, the poroelastic model of intervertebral disc is presented and the results of short-term, long-term creep tests and cyclic loading were investigated. The results of the poroelastic model are in agreement with experimental ones reported in the literature. Hence, this model can be used to study how different dynamic loading regimes are important as risk factors for initiation of intervertebral disc degeneration.
Tissue Engineering
Mehdi Navidbakhsh; Milade Jafarnejad
Volume 3, Issue 4 , June 2009, , Pages 299-306
Abstract
The cancer changes the cytoskeleton of the cells .This change has some effects on the cell mechanobiology and will lead to some changes in the deformability of the cells. The moving ability of the cancer cells would be more than healthy cells. Thus, they can migrate through the tissue in human body. ...
Read More
The cancer changes the cytoskeleton of the cells .This change has some effects on the cell mechanobiology and will lead to some changes in the deformability of the cells. The moving ability of the cancer cells would be more than healthy cells. Thus, they can migrate through the tissue in human body. In this survey, a valid FEM of a cancer cell is presented. Then the effects of various factors such as membrane thickness, elasticity, strain, and frequency response are studied during a process of being converted from normal cells into cancerous malignant cells. Besides, the initial mathematical models are provided. The results clarify that an increase in membrane elasticity, strain, and frequency would lead to increase in the reaction force. However, an increase in the membrane thickness decreases the reaction force.
Tissue Engineering
Mohammad Haghpanahi; Mohammad Nikkhoo; Habibollah Peirovi
Volume 2, Issue 1 , June 2008, , Pages 47-56
Abstract
According to mechanobilogical studies as an infrastructure for tissue engineering researches, this paper presents a triphasic finite element modeling of intervertebral discs such a hydrated porous soft tissue. First, the governmental equations were derived on the basis of the laws of continuum mechanics. ...
Read More
According to mechanobilogical studies as an infrastructure for tissue engineering researches, this paper presents a triphasic finite element modeling of intervertebral discs such a hydrated porous soft tissue. First, the governmental equations were derived on the basis of the laws of continuum mechanics. Then the standard Galerkin weighted residual method was used to form the finite element model. The implicit time integration schemes were applied to solve the nonlinear equations. The formulation accuracy and convergence for one dimensional case were examined with Simon's and Sun's analytical solutions and also Drost's experimental Data. It was shown that the mathematical model is in excellent agreement and has the capability to simulate the intervertebral disc response under different types of mechanical and electrochemical loading conditions. Finally, to have a short review of the capability of the model, a homogenous two dimensional version of the model was applied to simulate the response of a simple sagittal slice of the intervertebral disc.
Biomechanics of Bone / Bone Biomechanics
Ahmad Raeisi Najafi; Ahmad Reza Arshi; Mohammad Reza Eslami; Shahriar Fariborz; Mansour Moeinzadeh
Volume 1, Issue 3 , June 2007, , Pages 177-188
Abstract
A two dimensional finite element model for the human Haversian cortical bone is represented. The interstitial bone tissue, the osteons and the cement line were modeled as the matrix, the fibers and the interface, respectively. This was due to similarities between fiber-ceramic composite materials and ...
Read More
A two dimensional finite element model for the human Haversian cortical bone is represented. The interstitial bone tissue, the osteons and the cement line were modeled as the matrix, the fibers and the interface, respectively. This was due to similarities between fiber-ceramic composite materials and the human Haversian cortical bone. The stress intensity factor in the microcrack tips vicinity was computed using the linear elastic fracture mechanics theory and assuming a plane strain condition. It was therefore possible to study the effect of microstructure and mechanical properties of Haversian cortical bone on microcrack propagation trajectory. The results indicated that this effect was limited to the vicinity of the osteon. If both osteon and cement line were assumed to be softer than the interstitial tissue, the stress intensity factor was increased when the crack distance to the osteon reduced. The stress intensity factor decreased if both osteon and cement line were assumed to be stiffer than the interstitial tissue. The resulting simulation indicated that the effect of existence of osteon on the stress intensity factor was no significance, if both the interstitial tissue and cement line were assumed either stiffer or softer than the osteon. Microcrack trajectory was observed to deviate from the osteon under tensile loading; indicating an independence from the mechanical properties of various tissues. In fact, the microcrack adopts a trajectory between the osteons, thereby increasing the necessary absorbed energy for fracture. This results in an increase in the human Haversian cortical bone toughness. The result of this finite element modeling has been confirmed by through evaluation and comparison made with experimental results.
Biomechanics of Bone / Bone Biomechanics
Khalil Farhangdoust; Ali Banihashem; Ali Ghaneei
Volume -2, Issue 1 , July 2005, , Pages 1-8
Abstract
Using ceramic coatings has increased in popularity due to their compatibility with bone, absence of the fibrous layer at the coating-implant interface, and the stronger coating-bone bonding. Among these coatings, hydroxyapatite (HA) and fluoroapatite (FA) are more popular. For the first time in this ...
Read More
Using ceramic coatings has increased in popularity due to their compatibility with bone, absence of the fibrous layer at the coating-implant interface, and the stronger coating-bone bonding. Among these coatings, hydroxyapatite (HA) and fluoroapatite (FA) are more popular. For the first time in this paper, modeling and stress analysis have been carried out for 24 implants in an axisymetric form using the finite element technique. Twelve of these samples belong to IMZ and the rest are from Dyna system. All implants had HA and FA coatings with thicknesses between 10 to 100 microns. The stress analysis results show that the stress concentration at the implant-coating and bone-coating bonding surfaces decreases with the increase of coating thickness. In addition, stress concentrations for implants with FA coatings are always more than those with HA coatings. In all implants, stress concentration has been observed around the bone crest.
