@article { author = {Barani, Zohre and Haghpanahi, Mohammad and Katouzian, Hamid Reza and Saeidi, Hasan}, title = {A Three Dimensional Stress Analysis Of Diabetic Insole And Evaluation Of Silicone Gel Material Using Finite Element Approach}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {111-116}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13522}, abstract = {Current research in foot biomechanics includes studies on prevention of recurrence of neuropathic foot ulcers. This prescribes accommodative insoles, which reduce plantar pressure levels particularly under the hallux. There is little quantitative information available regarding the effects of insole materials. The insole models available in the literature are mostly two- dimensional (2-D). Hence, there is a need to develop a three-dimensional (3-D) model with actual geometry which includes sufficient details. In this study a 3-D model of the insole was constructed. A linear and non-linear static analysis using finite element method (FEM) was done. To construct the 3-D finite element model, 14736 nodes and 16170 elements were used. This research has shown that Silicone Gel is very effective in terms of reduction of stress concentrations. The techniques used in this research provide a promising approach to understand the behavior of insole material as well as a guideline in the design of therapeutic footwear and orthoses for insensate feet.}, keywords = {Diabetes,Insoles,Silicone Gel,Three Dimensional Fem,Hyperelastisity}, title_fa = {مدل سه بعدی برای کفی کفش بیماران دیابتی و بررسی نقش ماده سیلیکون ژل در تحلیل تنش و کرنش به روش اجزای محدود}, abstract_fa = {یکی از عوارض مهم و شایع در بیماری دیابت، زخم کف پای این افراد است که در اثر توزیع نامناسب فشار در کف پا اتفاق افتاده و در نهایت منجر به قطع پای بیماران می گردد. ب طور کلی، تحقیقات صورت گرفته در زمینه کفی های طبی در سطح یک مدلسازی دو بعدی و در قسمت محدودی از کفی بوده است. این مدل ها برای برسی توزیع تنش در کل کفی کافی نبوده و نیاز به یک مدل سه بعدی که بتواند موقعیت توزیع تنش و کرنش را در تمام قسمت های کفی به طور دقیق تر نشان دهد، احساس می شد. در این تحقیق، به موازات تهیه مدلی سه بعدی از یک کفی کفش و با بهره گیری از نرم افزار Ansys و تحلیل خطی و غیر خطی به روش اجزای محدود، ماده سیلیکون ژل، که درساخت کفی کفش بیماران دیابتی کاربرد فراوانی دارد، مورد بررسی قرار گرفت. برای ساخت مدل سه بعدی با هندسه غیر خطی از المان های هایبرید، جامد، سه بعدی، چهار وجهی، دارای10 گره و هر گره با سه درجه آزادی استفاده شد. با بررسی نتایج به دست آمده در شش منطقه کف پا و در دو حالت بارگذاری خطی و غیر خطی گرفته شد که سیلیکون ژل در ناحیه دارای بیشترین فشار یعنی زیر انگشت بزرگ پا، در جهت Y بیشترین کرنش را نشان می دهد.}, keywords_fa = {سیلیکون ژل,هایپرالاستیسیتی,دیابت,زخم کف پا,کفی کفش}, url = {https://www.ijbme.org/article_13522.html}, eprint = {https://www.ijbme.org/article_13522_1ce3486e771703bb8dae58fd5a59e43d.pdf} } @article { author = {Abrishami Moghaddam, Hamid and Sheikh Hasani, Alireza and Mostafa, Abbas and Giti, Masoume and Abdolmaleki, Parviz}, title = {Automatic Diagnosis Of Clustered Microcalcifications Using Wavelet Transform And Neural Networks}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {117-128}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13523}, abstract = {This paper presents a CAD system for detection and diagnosis of microcalcification clusters in mammograms. The proposed algorithm is composed of three main stages. In the first stage, the image pixels are examined for corresponding to individual microcalcification objects. For this purpose, the wavelet transform of the image is computed. Then two wavelet coefficients as well as two statistical features are used with a neural network for a primary classification of the image pixels. In the second stage, some noisy pixels extracted by the first step are eliminated. Then 18 features defined for each microcalcification are used with a nonlinear classifier for accurate detection of microcalcifications. For training of this classifier we used 16 regions from a database containing 379 microcalcifications. Finally, in the third stage five features defined for each microcalcification cluster with a neural network are used to recognize malignant microcalcification clusters. For training of this network, 22 clusters including 8 malignant and 14 benign cases were used. The performance of the algorithm was evaluated using a separate image set composed of 22 clusters including 10 malignant and 12 benign cases. Using these tests images and the threshold value of 0.45, the sensitivity of the algorithm was 100% and its specificity was 91.6%.}, keywords = {Mammography,Microcalcification,Automatic Diagnosis Of Mammograms,Artificial neural networks,image processing,Wavelet transform}, title_fa = {تشخیص خودکار خوشه های میکروکلسیفیکاسیون به کمک تبدیل موجک و شبکه های عصبی}, abstract_fa = {در این مقاله، یک سیستم CAD به منظور شناسایی و تشخیص خوشه های میکروکلسیفیکاسیون در تصاویر ماموگرافی معرفی شده است. الگوریتم معرفی شده مرکب از سه مرحله اساسی است. در مرحله اول، تبدیل موجک روی تصاویر ماموگرافی اعمال شده و دو ضریب موجک به همراه دو ویژگی آماری به عنوان ویژگی های متمایز کننده پیکسل ها از نظر تعلق به یک دانه میکروکلسیفیکاسیون استخراج می گردد. سپس با استفاده از یک شبکه عصبی، دسته بندی اولیه پیکسل ها انجام می شود. در مرحله دوم الگوریتم، پس از حذف پیکسل های نویزی حاصل از مرحله اول، اجسام باقیمانده از نظر مطابقت با یک دانه میکروکلسیفیکاسیون مورد بررسی قرار می گیرد. به این منظور، از 18 ویژگی تعریف شده برای هر دانه میکروکلسیفیکاسیون، و یک دسته بندی کننده غیرخطی استفاده شده و دانه های میکروکلسیفیکاسیون با دقت خوبی شناسایی می شود. برای آموزش این دسته بندی کننده، از 16 ناحیه حاوی میکروکلسیفیکاسیون های بدست آمده از تصاویر پایگاه داده ای که مجموعا شامل 379 میکروکلسیفیکاسیون بودند استفاده شده است. در مرحله سوم، با استفاده از 5 ویژگی مربوط به خوشه های میکروکلسیفیکاسیون و یک شبکه عصبی، در مورد بدخیمی خوشه های میکروکلسیفیکاسیون قضاوت به عمل می آید. برای آموزش این شبکه عصبی از 22 خوشه که از 14 خوشه خوش خیم و 8 خوشه بدخیم تشکیل شده بودند استفاده شد. برای سنجش کارآیی سیستم نیز 22 خوشه دیگر که در مرحله آموزش از آنها استفاده نشده بود و شامل 10 خوشه خوش خیم و 12 خوشه بد خیم بودند، به سیستم اعمال شد. با اعمال تصاویر فوق، این سیستم در مقدار آستانه 0.45 مقدار حساسیت 100% و مقدار خصوصیت 91.6% از خود نشان داد. با توجه به این مقادیر می توان قابلیت مناسب الگوریتم ایجاد شده را تایید نمود.}, keywords_fa = {ماموگرافی,میکروکلسیفیکاسیون,تشخیص خودکار تصاویر ماموگرافی,شبکه های عصبی مصنوعی,پردازش تصویر,تبدیل موجک}, url = {https://www.ijbme.org/article_13523.html}, eprint = {https://www.ijbme.org/article_13523_dc54317bc9c7f45fa83866dec0452da8.pdf} } @article { author = {Firouzi, Faramarz and Fatouraee, Nasser and Najarian, Siamak}, title = {Simulation Of Blood Flow In The Sac-Type Ventricular Assist Device Using Computational Fluid Dynamic}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {129-142}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13524}, abstract = {Nowadays in the industrial world, because of increase of heart transplantation demand, long-term ventricular assist devices (VAD) are more needed. Implantable sac-type is one of the newest of them producing pulsatile flow. In this research, three different models of sac-type VAD are numerically simulated. Simple motion is supposed for moving wall in model 1. In model 2, the motion of moving wall is assumed wavy form to study the effect of moving wall form on blood flow. In model 3, the pressure boundary condition is added to model 2. In this model, the effect of actual blood pressure on flow pattern is considered. Results of each model demonstrate the viscose term of blood flow stresses applied to the membrane is negligible, and only pressure term is effective. However, the motional pattern of membrane and also applied pressure on boundary are approximately ineffective on blood flow pattern.}, keywords = {Computational fluid dynamics,Simulation Of Blood Flow,Ventricular Assist Device,Sac-Type Blood Pump,Pulsatile Flow,Moving Boundary}, title_fa = {شبیه سازی جریان خون در وسیله کمکی بطن چپ از نوع کیسه ای با استفاده از روش دینامیک سیالات محاسباتی}, abstract_fa = {در زندگی صنعتی امروز، تقاضا برای پیوند قلب رو به افزایش است. به همین دلیل نیاز به وسایل کمکی کاشتنی در بدن به منظور استفاده طولانی مدت بیشتر شده است. یکی از جدیدترین این وسایل، از نوع کسیه ای آن است که قابلیت کاشتن در بدن را داشته و مولد جریان ضربانی می باشد. در تحقیق حاضر، سه مدل مختلف از وسیله کمکی بطن چپ قلب از نوع کیسه ای به صورت عددی تحلیل شده است. در مدل 1، حرکت دیواره متحرک وسیله کمکی به صورت ساده فرض شده است. در مدل 2، به منظور بررسی اثر شکل مرز متحرک در جریان، این حرکت به صورت مواج در نظر گرفته شده است. در مدل 3، شرایط مرزی فشار به مدل 2 اضافه شده تا تاثیر شرایط فشار واقعی موجود در بدن بر الگوی جریان عبوری بررسی شود. نتایج حاصل از بررسی تنش های اعمال شده توسط جریان خون به غشا کیسه ای در مدل های مختلف و مقایسه آنها نشان می دهد ترم ویسکوز تنش اعمال شده از سیال در مقایسه با ترم فشار آن قابل صرف نظر کردن است. هم چنین الگوی حرکتی دیواره متحرک و اعمال فشار سیال در شرایط مرزی باعث تغییر عمده ای در الگوی جریان خون عبوری نمی شود.}, keywords_fa = {تحلیل عددی جریان خون,وسیله کمکی بطن چپ,پمپ خون از نوع کیسه ای,جریان ضربانی,مرز متحرک,دینامیک سیالات محاسباتی}, url = {https://www.ijbme.org/article_13524.html}, eprint = {https://www.ijbme.org/article_13524_2019a7ecd407134182e32fc6fbabd05f.pdf} } @article { author = {Sheikh Mehdi Mesgar, Abdorreza and Mohammadi, Zahra}, title = {Crystallization Behavior And In Vitro Bioactivity Of Bioactive Glasses In The System Mgo-Cao-P2o2-Sio2}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {143-151}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13525}, abstract = {Crystallization behavior and in vitro bioactivity of the bioactive glasses in the system MgO-CaO-P2O5-SiO2 were studied. Crystallization of bulk glasses led to the formation of large cracks in crystallized product that was attributed to the precipitation of fibrous b-wollastonite crystals growing perpendicular to the outer surface of the glasses. Crack-free dense crystallized products were formed by crystallization of the same glasses in a powder compact. By substituting SiO2 for P2O5, there was no change in the kind of formed crystalline phases but the apatite contents decreased and wollastonite contents increased. The whitlockite phase was formed when glass powder compacts were heated above wollastonite crystallization temperature. The in vitro bioactivity of the glasses and glass-ceramics was evaluated by examining apatite layer formation on their surfaces in the simulated body fluid (SBF) with SEM/EDXA. All samples showed an apatite layer on their surfaces after immersion in SBF.}, keywords = {Bioactive Glasses,In Vitro Bioactivity,Glass-Ceramics,Crystallization Behavior,Bioactive Materials}, title_fa = {رفتار تبلور و زیست فعالی در محیط شبیه سازی شده بدن در شیشه های زیست فعال سیستم MgO – CaO – P2O5 - SiO2}, abstract_fa = {رفتار تبلور و زیست فعالی در شرایط آزمایشگاهی در شیشه های زیست فعال سیستم MgO – CaO – P2O5 - SiO2  مورد تحقیق قرار گرفته است. تبلور شیشه ها باعث ایجاد ترک های بزرگی در محصل متبلور می شود. رسوب بلورهای الیافی ولاستونیت که به صورت عمود بر سطوح خارجی شیشه ها رشد کرده اند، عامل ایجاد این ترک ها هستند. تبلور شیشه های پودری شکل فشرده، محصولاتی متبلور، متراکم و بدون ترک ایجاد می نماید. با کاهشP2O5  افزایش  SiO2تغییری در نوع فازهای تشکیل شده به وجود نمی آید، بلکه مقدار فاز آپاتیت، کاهش و مقدار فاز ولاستونیت افزایش می یابد. عملیات حرارتی نمونه ها در دمای بالا موجب تشکیل فاز بتا– ویتلوکیت می شود. بررسی آزمایشگاهی زیست فعالی شیشه و شیشه– سرامیک های مورد بررسی در مایع شبیه سازی شده بدن، توسط میکروسکوپ الکترونی روبشی و تکینک تجزیه با توزیع انرژی پرتو ایکس، تشکیل لایه غنی از کلسیم و فسفر را روی سطح نمونه ها تایید کرده است.}, keywords_fa = {شیشه های زیست فعال,بررسی آزمایشگاهی زیست فعالی,شیشه– سرامیک ها,رفتار تبلور,مواد زیست فعال}, url = {https://www.ijbme.org/article_13525.html}, eprint = {https://www.ijbme.org/article_13525_130f112cdf7e73eb54308bb0f7165c15.pdf} } @article { author = {Rezaei Pajand, Jalil and Chavoshi, Seyed Mohammad}, title = {Mathematical Modeling Of Frictional Force Between Ligature And Orthodontic Wire}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {153-158}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13526}, abstract = {The main objective of this study is to present a mathematical model for frictional forces in orthodontic tooth movements. In order to produce lighter and more efficient sliding movement, good estimation of frictional forces must be determined. For the purpose of analysis, a typical bracket with a circular cross section arch wire is considered with a view to examine the effect of ligation technique (shape), geometry and properties of ligature, and arch wire on the friction forces between ligature and arch wire. Both uniform and non-uniform distributions of contact forces are considered. The result presented herein indicated that, for circular orthodontic arch wires, friction force between ligature and wire is proportional to tensile force in elastomeric ligature. This force is depended on the shape of ligation, material properties and geometries of wire, bracket and ligature.}, keywords = {Ligature,Friction Force,Mathematical models,Circular Orthodoutic Wire,Tooth Movement}, title_fa = {مدلسازی ریاضی نیروی اصطکاک بین لیگاچور و سیم ارتودنسی}, abstract_fa = {هدف از این مطالعه، دستیابی به یک مدل ریاضی برای محاسبه نیروی بین سیم و لیگاچور الاستومری در حرکت لغزشی دندان است. با استفاده از این مدل ریاضی می توان اصطکاک را از زوایای مختلف، از نقطه نظر کیفی و کمی تحلیل نمود. در اثر کشش لیگاچور، نیروی فشاری بین سطوح تماس لیگاچور و سیم ارتودنسی ایجاد می شود، از این رو، هنگام حرکت دندان، نیروی اصطکاک بین این سطوح ایجاد می گردد. در این بررسی، آن قسمت از نیروی اصطکاک که در سطوح تماس سیم و لیگاچور ایجاد می شود مورد توجه قرار گرفته است. مابین نیروی کششی لیگاچور و نیروی اصطکاک بین لیگاچور و سیم و هم چنین سیم و براکت، رابطه مستقیم وجود دارد. از این مدل می توان رابطه بین نیروی اصطکاک با جنس، ضریب کشسانی، ابعاد و تغییر طول لیگاچور و نیز ابعاد براکت، قطر و جنس سیم ارتودنسی را مشخص نمود.}, keywords_fa = {نیروی اصطکاک,لیگاچور,سیم ارتودنسی,مدل ریاضی,حرکت دندان}, url = {https://www.ijbme.org/article_13526.html}, eprint = {https://www.ijbme.org/article_13526_2fa9b7f804d1ad9322c5d81b715b285a.pdf} } @article { author = {Hosseini Nasab, Seyed Hamed and Farahmand, Farzam and Karegar Novin, Mohammad Hossein and Karami, Mohsen}, title = {Parameters Affecting The Stresses Within Pedicel Screw Systems In A Stabilized Lumbar Spine}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {159-172}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13527}, abstract = {Several linear and nonlinear finite element models of intact and fixed lumbar spine were analyzed. The intact model was developed based on CT images, and following verification, was employed to simulate the spinal fixation procedure using two different commercial pedicle screw systems. The results including the force-deformation behavior and the stress distribution within the structures were studied in detail. The effects of pedicle morphology, insertion errors and material properties of bone graft on the stress distribution pattern within the vertebrae and implant components were also studied. The results suggest superiority of titanium implants over steel implants, necessity of bone graft insertion, and a higher failure risk for screws due to osteoporosis. It has been recommended that surgeons use thicker screws when dealing with pedicels with larger anterior posterior length and avoid insertion errors to minimize the risk of screw fracture.}, keywords = {Lumbar Spine,Pedicle Screw,Stress analysis,finite element method,Bone Graft}, title_fa = {پارامترهای موثر بر تنش های وارده به سیستم های پیچ پدیکل در ستون مهره تثبیت شده}, abstract_fa = {در این مطالعه، چندین مدل المان محدود خطی و غیر خطی از ستون مهره در حالت سالم و تثبیت شده مورد تحلیل قرار گرفته است. مدل سالم با استفاده از تصاویر سی تی اسکن توسعه یافته و پس از بررسی اعتبار آن، عمل تثبیت با استفاده از دو نوع ایمپلنت رایج شبیه سازی شده است. نتایج مدل ها، شامل رفتار بار- تغییر مکان و توزیع تنش در ساختارهای مختلف مورد بررسی قرار گرفته است. هم چنین اثر تغییر در پارامترهای هندسی پدیکل، خطای جایگذاری و خصوصیات پیوند استخوانی بر نحوه توزیع تنش در ساختارها ستون مهره و اجزای ایمپلنت، با استفاده از یک مدل پارامتری بررسی شده است. نتایج حاصله بر مزیت ایمپلنت های تیتانیومی نسبت به ایمپلنت های فولادی، لزوم استفاده از یک پیوند استخوانی قدامی و افزایش احتمال شکست پیچ در اثر پوکی استخوان در مجموعه های تثبیت شده تاکید می کنند. هم چنین بر مبنای نتایج مطالعه، استفاده از پیچ هایی با قطر بزرگتر برای پدیکل هایی که دارای طول قدامی– خلفی هستند و پرهیز از خطاهای جایگذاری، به منظور کاهش احتمال شکست پیچ های پدیکل به جراحان توصیه شده است.}, keywords_fa = {ستون مهره,پیچ پدیکل,تحلیل تنش,روش المان محدود,پیوند استخوانی}, url = {https://www.ijbme.org/article_13527.html}, eprint = {https://www.ijbme.org/article_13527_5db0ea95c2764af1799719ad8e1742fc.pdf} } @article { author = {Ourang, Fariba and Rafienia, Mohammad}, title = {Effect Of Chemical Composition On Release Behavior And Morphology Of Polyurethane Microspheres Prepared By Solvent Evaporation Method}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {173-179}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13528}, abstract = {Polyurethane micro spheres have been synthesized by solvent evaporation technique with castor oil, Polycaprolacton (PCL), Hexamethylen diisocyanate (HMDI) and Ethyl diamine (ED) as carriers for controlled drug delivery systems. Release behavior of micro spheres has been investigated using Bromocresol purple die. Fourier transmission infrared (FTIR), Scanning Electron Microscope (SEM), Optical microscope, dissolution instrument and UV spectrophotometer were used to investigate the polymerization process, surface morphology, particle size, rate of release and calibration curve respectively. Results showed that urethane bonds were formed at 3300-3400cm-1 and 1650-1700 cm-1. SEM micrographs showed surface irregularities as a result of solvent evaporation. Particle sizes were higher for castor oil/HMDI rather than PCL/HMDI microbe ads and in both cases, particle size and Bromocresol purple die release increased with rising NCO/OH ratio.}, keywords = {Microencapsulation,Microsphere,Polyurethane,Solvent Evaporation,Controlled release}, title_fa = {اثر تغییر ترکیب شیمیایی بر رفتار رهایشی و مورفولوژی میکرواسفرهای پلی یورتان تهیه شده به روش تبخیر حلال}, abstract_fa = {میکرواسفرهای پلی یورتانی به منظور استفاده در سیستم های انتقال کنترل شده دارو، با روش تبخیر حلال و با استفاده از روغن کرچک، پلی کاپرولاکتون، هگزا متیلن دی ایزوسیانات (HMDI) و اتیلن دی آمین سنتز شدند. رفتار رهایش از میکرواسفرها با بهره گیری از رنگ برموکرسول پرپل مورد بررسی قرار گرفت. از روش های FTIR، SEM، میکروسکوپ نوری، دستگاه Dissolution و اسپکتروفتومترUV به ترتیب برای بررسی فرآیند پلیمریزاسیون، مورفولوژی سطحی، تعیین اندازه ذرات، تعیین سرعت رهایش و اندازه گیری غلظت رنگ آزاد شده استفاده گردید. نتایج بیانگر آن است که پیوندهای یورتانی در cm-1 3400-3300 و cm-1 1700-1650 تشکیل شده اند. تصاویرSEM نشان دهنده سطحی ناهموار است که نتیجه ای از فرآنید تبخیر حلال به شمار می رود. میکروذرات پلی یورتانی بر پایه روغن کرچک / HMDI دارای ابعاد بزرگتری نسبت به ذرات بر پایه پلی کاپرولاکتون / HMDI هستند و در هر دو مورد، با افزایش نسبت NCO/OH، اندازه ذرات و رهایش ماده رنگی برموکرسول پرپل افزایش می یابد.}, keywords_fa = {میکروکپسول,میکرواسفر,پلی یورتان,تبخیر حلال,رهایش کنترل شده}, url = {https://www.ijbme.org/article_13528.html}, eprint = {https://www.ijbme.org/article_13528_b5840b02867831f618ce5f8971975ec0.pdf} } @article { author = {Sadrnezhaad, Seyed Khatiboleslam and Tavabi, Amir Hossein and Ghoreishi, Saeed}, title = {Effect Of Cold Deformation On Superelasticity And Morphology Of Four Orthodontic Nitinol Wire}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {181-191}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13529}, abstract = {Tooth straightening with superelastic wire requires exertion of continued bending as well as tensional forces exerted by the wires to the teeth. The applied force can influence on properties of the wire. Knowing the amount and mechanism of this change results in both improvement of the clinical operation as well as the recovery of the used alloy. Investigating the possibility of exertion of a stable force during the curing period is substantial to orthodontists. Studying the possibility of recovery and re-circulation of the used material is of interest to engineers. The latest results obtained on the effect of bending on transformation temperatures, crystal structure and mechanical properties of four different orthodontic commercial wires are discussed in this paper. It is seen that the width of the hysteresis loop is reduced, percentage of the marten site phase is increased and the possibility of stress induced Rphase formation is increased due to the application of the deflection strains on the samples. The structural phase change occurring during mechanical and/or heating operations indicates that the alloy property can change from superelastic towards shape memory effect via heat treatment after cold working. Microstructural and transformation temperature studies show that R-phase formation is concomitant with the presence of marten site in the wires. These results indicate that the superelastic effects are correlated to the formation and elimination of small forcible hysteresis loop of the R phase.}, keywords = {Orthodontic Wire,Superelastic,Nitinol,R Phase,Stress Hysteresis}, title_fa = {تاثیر خمش بر ابر کشسانی و مورفولوژی چهار نوع سیم ارتودنسی تجارتی از جنس نیکل– تیتانیوم}, abstract_fa = {از سیم های نایتینول تجاری برای ردیف کردن دندان های نامنظم استفاده می شود. خاصیت ابر کشسان، سبب اعمال ممتد نیروهای خمشی، فشاری و کششی برای ایجاد نظم در دندان های نامرتب می شود. اعمال مداوم نیرو از نظر پزشکی حایز اهمیت است، زیرا اولا، طول دوره درمان را می کاهد و ثانیا، کیفیت معالجه را بهبود می بخشد، اما از دیدگاه مهندسی، خواص آلیاژ را تنزل داده و از کارآیی آن می کاهد. آخرین تحقیقات انجام شده درباره تاثیر خمش بر خواص مکانیکی، ریز ساختار و دماهای تغییر حالت چهار نمونه آلیاژ نایتینول تجارتی حاکی از باریک شدن پهنای پسماند، افزایش درصد فاز مارتنزیت و امکان ایجاد فاز R تحت تنش در اثر اعمال تغییر شکل سرد در آلیاژ است. نتایج تحقیق نشان می دهد امکان تغییر خواص آلیاژ از ابر کشسان به سمت حافظه دار در صورت انجام عملیات حرارتی پس از کار سرد وجود دارد. مطالعات فازشناسی و تعیین دماهای تغییر حالت، نشان از وقوع استحاله فاز R در جوار مارتنزیت دارد. این نتایج حاکی از ارتباط رفتار ابرکشسانی با پسماند تنشی کوچک مربوط به تشکیل و از بین رفتن فاز R می باشد.}, keywords_fa = {سیم ارتودنسی,ابرکشسانی,نایتینول,فاز R,تنش پسماند}, url = {https://www.ijbme.org/article_13529.html}, eprint = {https://www.ijbme.org/article_13529_9947a531206106d0d10a2733634bfed3.pdf} }