@article { author = {Khaghani, Masume and Golniya, Zahra and Doostmohammadi, Ali}, title = {Investigating the Effect of Adding ZrO2 Nanoparticles on Physical and Mechanical Properties of Glass Ionomer Cements}, journal = {Iranian Journal of Biomedical Engineering}, volume = {6}, number = {1}, pages = {1-7}, year = {2012}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2012.13092}, abstract = {The aim of this work was evaluating of zirconia nanoparticles’ effect on physical and mechanical properties of dental glass ionomer cements (GICs). Ceramic part of GIC was prepared using melting method and zirconia nanoparticles were added to GIC in 1, 3 and 5 weight percent. Characterization tests and compressive strength evaluation of nanocomposite samples were carried out. The XRD results showed that the prepared ceramic part of GIC was completely amorphous and can be used as the matrix of composite. The result of XRF showed that the chemical composition of ceramic part of GIC was similar to expected composition. Also the results of mechanical properties determination analysis showed that the addition of zirconia nanoparticles to GIC could improve the compressive strength. The maximum of this strength obtained using 1% wt of GIC in zirconia composite. Increasing the nanoparticles content resulted in decrease of compressive strength but the strength of composite with any composition was more than the strength of control sample. According to the results of this study, the most proper composite was the one containing1%wt zirconia nanoparticles. }, keywords = {Compressive strength,Glass ionomer cement,Zirconia nanoparticles}, title_fa = {بررسی تأثیر نانوذرات زیرکونیا بر خواص فیزیکی و مکانیکی سیمان‌های گلاس‌آینومر}, abstract_fa = {  این پژوهش با هدف بررسی تأثیر نانو ذرات زیرکونیا بر خواص فیزیکی و مکانیکی سیمان گلاس‌آینومر دندانی انجام شد. جزء سرامیکی سیمان گلاس به روش ذوبی ساخته شد و نانوذرات زیرکونیا در مقادیر 1، 3 و 5 درصد وزنی به آن افزوده شد. آزمون‌های مشخصه‌یابی و اندازه‌گیری استحکام فشاری کامپوزیت گلاس آینومر/زیرکونیا انجام شد. نتایج آزمون پراش پرتو ایکس نشان داد که جزء سرامیکی سیمان گلاس آینومر تولید شده ساختاری کاملاً آمورف دارد کهمی‌تواند به‌عنوان ماده زمینه کامپوزیت، بدون هیچگونه ناخالصی استفاده شود. نتیجه تحلیل عنصری نیزمشخص کرد که ترکیب شیمیایی جزء سرامیکی سیمان گلاس آینومر، با تقریب بسیار خوبی مشابه درصدهای وزنی مورد انتظار بود. نتایج آزمون سنجش استحکام فشاری نشان داد  افزودن نانوذرات زیرکونیا به سیمان گلاس‌آینومر باعث افزایش استحکام فشاری می‌شود و بیشینه این استحکام در حضور 1 درصد وزنی نانوذرات زیرکونیا مشاهده شد. با افزایش مقدار زیرکونیا، میزان استحکام کاهش یافت؛ هرچند این مقدار  همچنان از استحکام نمونه سیمان بدون نانوذرات زیرکونیا (نمونه کنترل) بیشتر بود. برپایه نتایج این پژوهش به نظر می‌رسد مناسب‌ترین کامپوزیت از لحاظ استحکام فشاری، کامپوزیت سیمان گلاس‌آینومر با 1 درصد وزنی نانوذرات زیرکونیا است. نتیجه نهایی این پژوهش، دستیابی به کامپوزیت گلاس آینومر/زیرکونیا است، به طوری که ضمن حفظ خواص فیزیکی، استحکام فشاری آن نیز افزایش یافته است. }, keywords_fa = {استحکام فشاری,سیمان گلاس‌آینومر,نانو ذرات زیرکونیا}, url = {https://www.ijbme.org/article_13092.html}, eprint = {https://www.ijbme.org/article_13092_54315ca2a139fe9296a581b155fe811e.pdf} }