@article { author = {Farshidfar, Sara Sadat and Mallakzadeh, Mohammad Reza and Yazdi, Hamid Reza}, title = {To Design and Make a Mechanical System for Clinical Studying on Rotational Deformities of Tibia Affecting the Tibiofemoral Contact Pressure under Standing Position Loading of Human Cadavers}, journal = {Iranian Journal of Biomedical Engineering}, volume = {6}, number = {1}, pages = {49-55}, year = {2012}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2012.13098}, abstract = {The aim of this study was to compare the contact area and pressure within medial and lateral compartments of tibiofemoral joint during internal and external rotational deformities of tibia bone. Methods: five lower extremities of fresh frozen human cadavers were tested by using a mechanical system was designed for the first time in IRAN to simulate the static position loading of standing on two legs in full extension knee under 400N loading along the longitudinal axis of each foot. The contact area and pressure were measured by FUJIfilm Prescale films under axial loading in neutral rotation and serial mal-rotations of tibia from 40 degrees external to 40 degrees internal mal-rotations in 10 degrees increments by tibial osteotomy. Results: contact area and lateral compartment contact pressure was not significantly affected by mal-rotations. Medial compartment contact pressure increased with external and decreased with internal mal-rotations. Changing the medial compartment contact pressure of tibiofemoral joint in various rotational alignments of tibia can be very effective in rapid growth of knee osteoarthritis symptoms specially in people with unilateral medial knee osteoarthritis.}, keywords = {knee osteoarthritis,tibial rotations,contact area,contact pressure,tibiofemoral joint}, title_fa = {طراحی و ساخت وسیله آزمایشگاهی جهت بررسی اثر پیچش استخوان تیبیا بر روی سطح تماس و فشار وارد بر مفصل تیبیوفمورال زانوی جسد در حالت ایستاده}, abstract_fa = {هدف از انجام این مطالعه، مقایسه سطح تماس و فشار وارده بر مفصل تیبیوفمورال در حین اعمال پیچش‌های داخلی و خارجی استخوان تیبیا است. برای این منظور استخوان تیبیای پای سالم جسد 5 مرد تازه یخ زده با روش استئوتومی از 40 درجه داخلی تا 40 درجه خارجی در گام‌های 10 درجه پیچش یافته؛ سپس در هر مرحله با استفاده از سیستم مکانیکی طراحی شد. به منظور شبیه‌سازی موقعیت استاتیک انسان ایستاده بر روی 2 پا، مفصل تیبیوفمورال هر پا به‌طور جداگانه در حالت فول‌اکستنشن زانو، تحت بارگذاری 400 نیوتن در امتداد محور طولی پا قرار گرفت. سطح تماس و مقدار متوسط و بیشینه فشار وارد بر مفصل تیبیوفمورال با استفاده از فیلم‌های Fujifilm prescaleاندازه‌گیری شد. نتایج نشان دادند که سطح تماس‌ها در حین دوران‌ها تغییر چندانی نکرده است. فشار وارد بر کمپارتمنت میانی مفصل تیبیوفمورال، به‌طور قابل ملاحظه‌ای در پیچش‌های خارجی افزایش و در پیچش‌های داخلی، کاهش یافت. فشار وارد بر کمپارتمنت جانبی مفصل تیبیوفمورال در حین پیچش‌های خارجی و داخلی، تغییر محسوسی نداشت. تغییر فشار اعمال شده بر بخش میانی تیبیوفمورال در موقعیت‌های پیچشی مختلف استخوان تیبیا، می‌تواند در تغییر سرعت گسترش آرتروز زانو و به‌خصوص در افراد دچار اُستئوآرتریت یک‌طرفه میانی زانو بسیار مؤثر باشد.}, keywords_fa = {استئوآرتریت زانو,پیچش تیبیا,سطح تماس,فشار تماسی,مفصل تیبیوفمورال}, url = {https://www.ijbme.org/article_13098.html}, eprint = {https://www.ijbme.org/article_13098_7f9254aec9d24b15f23ec669ffdce831.pdf} }