@article { author = {Shafigh, Mohammad and Fatouraee, Nasser and Seddighi, Amir Saeed}, title = {Determination of parameters of Fung hyperelastic model for intracranial blood vessel of human using biaxial tensile test}, journal = {Iranian Journal of Biomedical Engineering}, volume = {5}, number = {4}, pages = {297-304}, year = {2012}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2012.13167}, abstract = {Understanding of mechanical properties of healthy brain arteries is a key element in the development of clinical diagnosis and prevention.For this reason we make biaxial measurements to have appropriate parameters for the underlying material models. To acquire these properties, eight samples were obtained from middle cerebral arteries of human cadavers, whose death were not due to injuries or diseases of cerebral vessels, and tested within twelve hours after resection. The changes of force and deformation until the vessel rupture were recorded. Thereafter, the stress-strain curves were plotted and fitted with a hyperelastic five-parameter Fung model parameters, according to the best fit, were determined. It was found that the arteries were remarkably stiffer in circumferential than in axial direction. It was also found that the use of multi-parameter hyperelastic constitutive models is applicable for mathematical description of behavior of cerebral vessel tissue. The reported material properties can be a proper reference for numerical simulation of cerebral arteries of healthy or diseased intracranial arteries.}, keywords = {Cerebral Blood Vessels,Anisotropic Tissue,Nonlinear Material,Plain Stress,Fung Model}, title_fa = {استخراج پارامترهای خواص مکانیکی عروق مغزی انسان با استفاده از آزمون کشش دومحوری}, abstract_fa = {خواص مکانیکی شریان‌های مغزی، با توجه به ارتباطشان با بیماری‌های این عضو، از ارزش بالینی بالایی برخوردار هستند. در راستای تحقق اهداف پروژه یک دستگاه آزمون کشش دومحوری منحصراً برای این مطالعه و با توجه به ابعاد، حساسیت و ماهیت ناهمگن نمونه‌ها ساخته شد. سپس هشت نمونه از شریان مغزی میانی از جسد انسان‌هایی که مرگشان به علت جراحات یا بیماری عروق مغزی نبود، از اجساد گرفته شدند. نمونه‌ها طی کم‌تر از دوازده ساعت بعد از جدا کردن‌شان از جسد، توسط دستگاه آزمون کششی دومحوری آزموده شدند. منحنی تنش-کشش به‌دست آمده از آزمون‌ها رسم شدند و سپس با مدل ریاضی‌ای که فانگ برای بافت با خاصیت هایپرالاستیک ارائه کرده است، برازش داده شدند. نتایج حاصل از این مطالعه نشان دادند که شریان‌ها به طور محسوسی در راستای محیطی سخت‌تر از جهت محوری هستند. همچنین نتایج نشان داد که استفاده از مدل‌های چند‌پارامتری هایپرالاستیک که دربرگیرنده معادلات رفتاری ماده است، می‌تواند برای توصیف ریاضی رفتار بافت عروق مغزی مفید باشند. خواص به‌دست آمده از  نمونه‌ها در این مقاله یک مرجع مناسب برای مدل‌سازی عددی، تجزیه و تحلیل رفتار عروق مغزی برای حالات سالم و یا بیمار است.}, keywords_fa = {عروق مغزی,بافت ناهمگن,مواد غیرخطی,تنش صفحه‌ای,مدل فانگ}, url = {https://www.ijbme.org/article_13167.html}, eprint = {https://www.ijbme.org/article_13167_eb2970d99341cc40b2ae56831218dc8a.pdf} }