@article { author = {Nazarinasab, Dariush and Mirbagheri, Alireza and Farahmand, Farzam and Afshari, Elnaz}, title = {Design and Analysis of a Novel Laparoscopic Instrument for Measuring the in Vivo Biomechanical Characteristics of Large Intra-abdominal Organs}, journal = {Iranian Journal of Biomedical Engineering}, volume = {7}, number = {4}, pages = {311-319}, year = {2014}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2014.13258}, abstract = {During laparoscopy surgery, the surgeon cannot touch the tissues directly by his/her hand. As a result, he is not able to use tactile sensing for evaluating the tissues’ mechanical behavior and diagnosing their normal/pathological conditions. Furthermore in vivo biomechanical characteristics of Intraabdominal soft tissues are among the main data required for surgery simulator softwares. The purpose of this research was to design and analyze a robotic surgical instrument which could grasp and compress the intra-abdominal large soft tissues and provide their force-displacement characteristics. The designed device is analogous to a robotic hand with two fingers, which are opened and closed using a parallelogram mechanism. A combined mechanism, including two connected sliding links and a compensatory cam, are used to prevent the fingers horizontal motion and keep the contact area fixed. The results of the kinematics analysis indicate the efficacy of the designed mechanism to provide pure vertical motion in fingers, parallel to each other. Also, the results of dynamic analysis indicate that, after dimensional optimization, the maximum force required at the actuator is 65 N, to apply a 10 N compressive force to the tissue at the middle of grasping range.}, keywords = {Soft tissue,Robotic hand,Elastometry,laparoscopy,Robotic surgery instrument}, title_fa = {طراحی و تحلیل یک ابزار لاپاراسکوپی نوین برای اندازه‌گیری مشخصات بیومکانیکی ارگان‌های حجیم داخل شکمی در حالت زنده}, abstract_fa = {در جراحی لاپاراسکوپی، امکان لمس مستقیم بافت‌‌های ناحیه جراحی برای جراح وجود ندارد و در نتیجه جراح نمی‌‌تواند با استفاده از حس لامسه، رفتار مکانیکی بافت را ارزیابی کند و وضعیت سلامت یا بیماری آنرا تمیز دهد. علاوه بر این مشخصات بیومکانیکی بافت‌های نرم داخل شکمی در حالت زنده از جمله داده‌های اصلی مورد نیاز برای نرم‌افزارهای شبیه‌ساز جراحی هستند. این پژوهش به منظور طراحی و تحلیل ابزار رباتیکی جدیدی انجام شده است که بتواند با گرفتن و فشردن بافت‌های نرم و حجیم درون شکمی داده‌های نیرو- جابه‌جایی آنها را استخراج کند. ابزار طراحی شده همانند دستی رباتیک با دو انگشت است که با استفاده از یک مکانیزم متواز‌‌‌ی ‌الاضلاعی باز و بسته می‌‌شود. به منظور جلوگیری از حرکت افقی انگشتان و عدم لغزش ابزار روی بافت در ناحیه تماس، از یک مکانیزم ترکیبی با دو لغزنده مرتبط و یک بادامک جبران‌‌ساز استفاده شده است. نتایج تحلیل سینماتیک نشان‌‌دهندة کارایی مکانیزم طراحی شده برای حرکت خالص قائم انگشتان به صورت موازی با یکدیگر است. همچنین نتایج تحلیل دینامیک پس از بهینه‌‌سازی ابعاد مکانیزم حاکی از نیروی عملگر حداکثر 65 نیوتن برای اعمال نیروی فشاری 10 نیوتنی به بافت است که در زوایای میانی بسته شدن ابزار رخ می‌‌دهد.}, keywords_fa = {بافت نرم,دست رباتیک,سختی‌سنجی,لاپاراسکوپی,ابزار جراحی رباتیک}, url = {https://www.ijbme.org/article_13258.html}, eprint = {https://www.ijbme.org/article_13258_2ca99b4e1bbeea334abd449efeafb255.pdf} }