@article { author = {Sadrnezhaad, Seyed Khatiboleslam and Tavabi, Amir Hossein and Ghoreishi, Saeed}, title = {Effect Of Cold Deformation On Superelasticity And Morphology Of Four Orthodontic Nitinol Wire}, journal = {Iranian Journal of Biomedical Engineering}, volume = {-1}, number = {2}, pages = {181-191}, year = {2005}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2005.13529}, abstract = {Tooth straightening with superelastic wire requires exertion of continued bending as well as tensional forces exerted by the wires to the teeth. The applied force can influence on properties of the wire. Knowing the amount and mechanism of this change results in both improvement of the clinical operation as well as the recovery of the used alloy. Investigating the possibility of exertion of a stable force during the curing period is substantial to orthodontists. Studying the possibility of recovery and re-circulation of the used material is of interest to engineers. The latest results obtained on the effect of bending on transformation temperatures, crystal structure and mechanical properties of four different orthodontic commercial wires are discussed in this paper. It is seen that the width of the hysteresis loop is reduced, percentage of the marten site phase is increased and the possibility of stress induced Rphase formation is increased due to the application of the deflection strains on the samples. The structural phase change occurring during mechanical and/or heating operations indicates that the alloy property can change from superelastic towards shape memory effect via heat treatment after cold working. Microstructural and transformation temperature studies show that R-phase formation is concomitant with the presence of marten site in the wires. These results indicate that the superelastic effects are correlated to the formation and elimination of small forcible hysteresis loop of the R phase.}, keywords = {Orthodontic Wire,Superelastic,Nitinol,R Phase,Stress Hysteresis}, title_fa = {تاثیر خمش بر ابر کشسانی و مورفولوژی چهار نوع سیم ارتودنسی تجارتی از جنس نیکل– تیتانیوم}, abstract_fa = {از سیم های نایتینول تجاری برای ردیف کردن دندان های نامنظم استفاده می شود. خاصیت ابر کشسان، سبب اعمال ممتد نیروهای خمشی، فشاری و کششی برای ایجاد نظم در دندان های نامرتب می شود. اعمال مداوم نیرو از نظر پزشکی حایز اهمیت است، زیرا اولا، طول دوره درمان را می کاهد و ثانیا، کیفیت معالجه را بهبود می بخشد، اما از دیدگاه مهندسی، خواص آلیاژ را تنزل داده و از کارآیی آن می کاهد. آخرین تحقیقات انجام شده درباره تاثیر خمش بر خواص مکانیکی، ریز ساختار و دماهای تغییر حالت چهار نمونه آلیاژ نایتینول تجارتی حاکی از باریک شدن پهنای پسماند، افزایش درصد فاز مارتنزیت و امکان ایجاد فاز R تحت تنش در اثر اعمال تغییر شکل سرد در آلیاژ است. نتایج تحقیق نشان می دهد امکان تغییر خواص آلیاژ از ابر کشسان به سمت حافظه دار در صورت انجام عملیات حرارتی پس از کار سرد وجود دارد. مطالعات فازشناسی و تعیین دماهای تغییر حالت، نشان از وقوع استحاله فاز R در جوار مارتنزیت دارد. این نتایج حاکی از ارتباط رفتار ابرکشسانی با پسماند تنشی کوچک مربوط به تشکیل و از بین رفتن فاز R می باشد.}, keywords_fa = {سیم ارتودنسی,ابرکشسانی,نایتینول,فاز R,تنش پسماند}, url = {https://www.ijbme.org/article_13529.html}, eprint = {https://www.ijbme.org/article_13529_9947a531206106d0d10a2733634bfed3.pdf} }