@article { author = {Nikkhoo, Mohammad and Tahassori, Ali and Haghpanahi, Mohammad}, title = {Design and Biomechanical Study of the First Iranian Cervical Cage using Finite Element Analyses}, journal = {Iranian Journal of Biomedical Engineering}, volume = {8}, number = {3}, pages = {203-212}, year = {2014}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2014.13534}, abstract = {To develop the advanced technologies in medical device industry, design and manufacturing of cervical cage was performed in Iran for the first time. This research-based industrial project should be accomplished based on precise biomechanical studies and mechanical tests. Hence, this study presents the optimization and biomechanical functional investigations of the first Iranian cervical cage (Manufactured by Attila Ortopaed Co.). For this purpose the intact cervical spine (C2-C7) was developed and was validated with in-vitro experiments.  Three inputs (i.e. geometrical parameters of the cage) and two outputs (i.e. deformation of the teeth in static and dynamic tests) parameters were selected for optimization procedure. Furthermore, the surgery in C5-C6 level was simulated by implanting the cervical cage. Finally, the biomechanical responses were investigated. The result confirmed that the biomechanical response of cervical cage is within the standard range and can be used well in clinics for surgical procedures.}, keywords = {Cervical Cage,Technology Localization,Cervical Spine Biomechanics,finite element analysis,Fusion}, title_fa = {طراحی و مطالعه بیومکانیکی اوّلین کیج‌گردنی بومی‌سازی شده براساس تحلیل‌های اجزای محدود}, abstract_fa = {با توسعه­ی فنّاوری­های پیش­رفته در زمینه­ی ایمپلنت­های ستون فقرات، طراحی و ساخت کیج­های گردنی برای اوّلین بار در ایران مورد توجه قرار گرفته­است. این پروژه­ی تحقیقاتی صنعتی برمبنای مطالعات دقیق بیومکانیکی و براساس مدل­های عملکردی اجزای محدود و آزمایش­های مکانیکی مربوط به آن انجام می­شود. درین تحقیق، بهینه­سازی طراحی و مطالعه­ی بیومکانیکی تنها کیج گردنی بومی سازی شده در ایران (ساخت شرکت دانش­بنیان آتیلا ارتوپد) بررسی شد. بدین منظور، ابتدا مدل اجزای محدود گردنی (C2-C7) تهیّه و محدوده­ی حرکتی آن با نتایج آزمایش­های آزمایشگاهی صحه­گذاری شد. سه پارامتر ابعادی به عنوان ورودی و دو پارامتر خروجی (شامل میزان تغییر شکل دندانه­های کیج در آزمایش استاتیکی و دینامیکی، طبق استاندارد ASTM F2077 برای فرآیند بهینه سازی طراحی و استفاده شد. سپس، تغییرات مورد نیاز جهت شبیه­سازی عمل جراحی هم­جوشی در سطح C5-C6 با جای­گذاری کیج گردنی انجام شد. درنهایت، نتایج مطالعه­های بیومکانیکی روی محصول نهایی کیج گردنی بومی­سازی ارائه شد. نتایج مطالعه­های بیومکانیکی نشان داد که این محصول به خوبی می­تواند در اعمال جراحی مورد استفاده قرار گرفته و مطابق با استانداردهای نمونه­های خارجی موجود در بازار، جهت کاربرد در جراحی­ها رقابت نماید.  }, keywords_fa = {کیج گردنی,بومی‌سازی فنّاوری,بیومکانیک ستون فقرات گردنی,تحلیل اجزای محدود,هم‌جوشی مهره‌ها}, url = {https://www.ijbme.org/article_13534.html}, eprint = {https://www.ijbme.org/article_13534_99f97e6534d8fc5808da24e176107bbd.pdf} }