@article { author = {Haghpanahi, Mohammad and Pourdanial, Mehdi}, title = {Material Property Sensitivity Analysis For Exact Finite Element Model Of The First Cervical Vertebra (Atlas)}, journal = {Iranian Journal of Biomedical Engineering}, volume = {1}, number = {4}, pages = {289-299}, year = {2008}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2008.13548}, abstract = {A 3D anatomically accurate finite element model of the human first cervical vertebra (atlas), including cortical and cancellous bones, was developed in ANSYS 9 based on CT-scan images. The main objective was to investigate the effect of cancellous bone on the value and distribution of maximum and average Von Mises stress in Atlas. The results showed that the material property of cancellous bone has no significant effect on the location of maximum stress and the pattern of average stress distribution in anterior arch, the junction of posterior arch and lateral mass and the groove of the posterior arch. Although the presence of cancellous bone in the model yielded higher values for the maximum and average stresses. The boundary condition had a considerable effect on this increase. Altering the material property of cancellous bone under neutral and hyperextension loading configurations, affected the average stress only in cancellous bone in the lateral mass, but change in the material property of cortical bone resulted in average stress change both in the cortical and cancellous bones, and in the lateral displacement of the lateral mass as well. The interconnected effects of changing the material properties of these two bone tissues were also studied. }, keywords = {FEM,Cervical spine,Atlas,Exact model,Cancellous bone,Stress analysis,Material property sensitivity analysis}, title_fa = {بررسی حساسیت خواص مواد در مدل المان محدود دقیق مهره اول ستون فقرات گردنی (اطلس)}, abstract_fa = {در این مقاله مدل المان محدود سه بعدی دقیق مهره اول ستون فقرات گردنی، شامل استخوان قشری و استخوان متخلخل، بر اساس تصاویر سی-تی اسکن، در محیط نرم افزار آنسیس9  توسعه یافت. هدف بررسی تاثیر استخوان متخلخل بر توزیع تنش بیشینه و میانگین در مهره اطلس و ارزیابی تاثیر تغییر خواص مواد بر مقادیر این تنش هاست. طبق نتایج به دست آمده، خواص استخوان متخلخل تاثیر چندانی بر موضع تنش بیشینه و الگوی تنش های میانگین در مقاطع کمان قدامی، محل اتصال کمان خلفی با توده طرفی و شیار مهره ندارد، هرچند وجود استخوان متخلخل سبب افزایش مقدار تنش بیشینه و تنش میانگین می شود. تاثیر شرایط مرزی بر این افزایش قابل توجه است. تغییر خواص مواد استخوان متخلخل، تحت بارگذاری محوری و اکستانسیون شدید فقط بر تنش متوسط در استخوان متخلخل توده های طرفی انجامید، این در حالی است که تغییر خواص مواد استخوان قشری به تغییر تنش متوسط در هر دو ناحیه و نیز جابجایی جانبی توده های طرفی منجر شد. همچنین این تحقیق تاثیر متقابل تغییر خواص مواد دو بافت استخوانی را بر تنش های متوسط آشکار ساخت.}, keywords_fa = {روش المان محدود,ستون فقرات گردنی,مهره اطلس,مدل المان محدود دقیق,استخوان متخلخل,تحلیل تنش,حساسیت خواص مواد}, url = {https://www.ijbme.org/article_13548.html}, eprint = {https://www.ijbme.org/article_13548_6f5c05c3430811a21d117c573a043e30.pdf} }