نوع مقاله : مقاله کامل پژوهشی
نویسندگان
1 دانشیار، گروه سیالات، پژوهشکده مکانیک، سازمان پژوهشهای علمی و صنعتی ایران
2 استادیار، گروه مهندسی پزشکی، پژوهشکده برق و کامپیوتر، سازمان پژوهشهای علمی و صنعتی ایران
چکیده
جریان سنج سیم داغ یکی از روش های مناسب برای انجام آزمون های بالینی و تحقیقاتی در زمینه تنفس است. این روش جریان سنجی پاسخ فرکانسی وسیع، پایداری در کالیبراسیون، کمترین افت فشار و دقت لازم در کل بازه موردنظر برای آزمون های بالینی انسانی را ارائه می دهد. با این حال عدم تشخیص جهت جریان هوا در مرحله دم و بازدم یکی از مشکلات این روش است. یکی از راه حل های این مشکل استفاده از 2 حسگر سیم داغ در اطراف یک مانع است. در این مقاله اثر شکل و موقعیت نسبی این 2 حسگر با مانع بررسی شده و در نهایت با استفاده از نتایج به دست آمده، اسپیرومتری از نوع سیم داغ طراحی و ساخته شد که نتایج بالینی بسیار مناسبی در اندازه گیری جریان دم و بازدم با استفاده از آن به دست آمده است.
کلیدواژهها
عنوان مقاله [English]
Inspiratory and Expiratory Flow Measurement in Hot-Wire Spirometer
نویسندگان [English]
- Mohammad Ali Ardakani 1
- Vahid Reza Nafisi 2
1 Associate Professor, Fluid Mechanic Group, Department of Mechanical Engineering, I.R.O.S.T.
2 Assistant Professor, Biomedical Engineering Group, Department of Electrical Engineering, I.R.O.S. T.
چکیده [English]
Hot-wire anemometry (HWA) is a suitable method for pulmonary research and routine tests. This anemometry method has high frequency response, calibration stability, low pressure drop and desired precision over whole clinical range of human respiration. Nevertheless, flow direction detection in inspiratory and expiratory phases is one of the main problems in this method. We apply the obstacle-wake probe as a solution. In this probe, an obstacle is inserted between 2 bot-wire sensors; and the effects of the shape and relative position of the obstacle and hot-wire sensors are discussed. Finally the results are used in manufacturing a clinical spirometer. It satisfies common clinical/research demands along with inspiratory/expiratory flow direction detection.
کلیدواژهها [English]
- Hot-wire anemometry (HWA)
- Reverse flow
- Obstacle-wake
- Hot-film probe
- upstream sensor
- downstream sensor