نوع مقاله : مقاله کامل پژوهشی
نویسندگان
1 دانشیار گروه بیومکانیک، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران
2 کارشناس ارشد بیومکانیک، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران
چکیده
به دلیل مهلک بودن و عواقب وخیم صدمات ستون گردنی، بررسی رفتار بیومکانیکی اجزای آن حین صدمه حایز اهمیت است. رایج ترین نوع صدمات مهره دوم گردنی، شکستگی زائده دندانه ای است که در این میان شکستگی نوع دوم بیشترین درصد صدمات را به خود اختصاص می دهد. در این مقاله پس از ارایه مدل دقیق سه بعدی مهره اکسس به تحلیل المان محدود آن پرداخته شده است. به منظور مطالعه شکستگی زائده دندانه ای شرایط مختلف بارگذاری شامل برخورد زائده دندانه ای با کمان قدامی مهره اطلس، توده های طرفی مهره اطلس و لیگامان عرضی، مدلسازی شد. نتایج بدست آمده حاکی از آن است که در این شرایط بارگذاری، تمرکز تنش در محل اتصال زائده دندانه ای با جسم مهره ای وجود دارد که به معنای احتمال بروز شکستگی نوع دوم در صورت برخورد زائده دندانه ای با کمان قدامی مهره اطلس، توده های طرفی مهره اطلس و لیگامان عرضی می باشد.
کلیدواژهها
موضوعات
عنوان مقاله [English]
A 3d Finite Element Analysis Of The Second Cervical Vertebra (Axis) To Study The Odontoid Fracture
نویسندگان [English]
- Mohammad Haghpanahi 1
- Ali Gorginzadeh 2
- Saba Sohrabi 2
1 Associate Professor, Biomechanical Engineering, Department of Mechanics, Iran University of Science and Technology
2 BS Biomedical Engineer, Biomechanical Engineering, Department of Mechanics, Iran University of Science and
چکیده [English]
Considering the life threatening consequences of the cervical spine injuries, the study of its biomechanical behavior has become important. The most common axis (second cervical vertebra) injury is called odontoid fracture, the majority of which is type II or dens fracture. In this study, an exact 3D finite element model of axis was developed and analyzed. To evaluate the stress distributions in the odontoid process during type II injuries, pressure loads were applied on the dens at locations where it is likely to come into contact with the surrounding neck construct. Results indicate stress concentration in the odontoid junction with the vertebral body, which suggests that there is a possibility of occurring type II fracture in the case of impaction of odontoid with atlas anterior arch, lateral masses and transverse ligament.
کلیدواژهها [English]
- Cervical Vertebra
- Odontoid Fracture
- finite element analysis
- Stress Distribution