نوع مقاله : مقاله کامل پژوهشی
نویسندگان
دانشگاه تربیت مدرس، دانشکده فنی و مهندسی، گروه مهندسی پزشکی
چکیده
وزن دهی عناصر درون یک آرایه فراصوت، یک روش آسان بری بهبود الگوی پرتو و افزایش وضوح تصویر است. متاسفانه وزن دهی باعث کاهش سیگنال به نویز (S/N) در خروجی آرایه و هم چنین کاهش کیفیت تصویر می گردد. در این تحقیق، جهت بهینه سازی الگوی پرتو در یک آرایه فراصوت، ایده تحلیل ریاضی تغییرات S/N در اثر وزن دهی مطرح و مساله طراحی بهینه وزن ها جهت حصول همزمان الگوی پرتو و سیگنال به نویز مطلوب، بیان و حل گردیده و روشی ارایه شده است که با اعمال آن ضمن دستیابی به الگوی پرتو مطلوب، بیشترین مقدار ممکن S/N ایجاد گردد. بررسی ها نشان داد با افزایش پهنای لوب اصلی الگوی پرتو، S/N کاهش می یابد. هم چنین مساله کاهش S/N در اثر وزن دهی، در آرایه های کامل بیشتر از آرایه های کم پشت قابل مشاهده است. همین وضعیت با کاهش عمق تمرکز نیز ایجاد می شود.
کلیدواژهها
عنوان مقاله [English]
Optimal Design Of Beam Pattern Of Ultrasound Arrays Considering Sensitivity Of Transducer
نویسندگان [English]
- Seyed Mahmoud Sakhaei
- Ali Mahloojifar
Department of Biomedical Engineering, Tarbiat Modarres University
چکیده [English]
The beam pattern profile of an ultrasound array is of great importance in ultrasound imaging. This profile could be enhanced by weighting the elements of array. However, this technique will decreases the signal to noise ratio (S/N) and consequently the quality of the obtained image. In this study, the S/N variation in weighting process is mathematically analyzed, and a new method is proposed to optimize the weighting parameters. The main objective of the method is to provide the desired output of the beam pattern profile of the ultrasound array, as well as the highest possible S/N. The results show that S/N decreases with increasing the main lobe width of beam pattern. The decrease of S/N by weighting in full arrays is higher than in the sparse ones. Also, reducing the focusing depth has the same effect on S/N.
کلیدواژهها [English]
- Ultrasound
- Phased Array
- Beam pattern
- Apodization
- Mathematical optimization