[1] R. Ullrich, "Etiology of cancer: Physical factors," Cancer: principles and practice of oncology, vol. 1, pp. 597-618, 2001.
[2] F. Laden, M. J. Stampfer, and A. M. Walker, "Lung cancer and mesothelioma among male automobile mechanics: a review," Reviews on environmental health, vol. 19, pp. 39-62, 2004.
[3] M. Goodman, M. J. Teta, P. A. Hessel, D. H. Garabrant, V. A. Craven, C. G. Scrafford, et al., "Mesothelioma and lung cancer among motor vehicle mechanics: a meta-analysis," Annals of Occupational Hygiene, vol. 48, pp. 309-326, 2004.
[4] P. J. Landrigan, P. J. Lioy, G. Thurston, G. Berkowitz, L. Chen, S. N. Chillrud, et al., "Health and environmental consequences of the world trade center disaster," Environmental health perspectives, vol. 112, p. 731, 2004.
[5] R. Herbert, J. Moline, G. Skloot, K. Metzger, S. Baron, B. Luft, et al., "The World Trade Center disaster and the health of workers: five-year assessment of a unique medical screening program," Environmental health perspectives, vol. 114, p. 1853, 2006.
[6] U. D. o. Health and H. Services, "Agency for Toxic Substances and Disease Registry," Toxicological Profile for Chromium, 1993.
[7] A. f. T. Substances and D. Registry, "Toxicological profile for asbestos," ed: US Department of Health and Human Services, Public Health Service Atlanta, GA, 2001.
[8] K. M. O’REILLY, A. M. Mclaughlin, W. S. Beckett, and P. J. Sime, "Asbestos-related lung disease," Chest, vol. 100, p. 2, 2007.
[9] E. R. Weibel, Geometry and dimensions of airways of conductive and transitory zones: Springer, 1963.
[10]K. Horsfield, G. Dart, D. E. Olson, G. F. Filley, and G. Cumming, "Models of the human bronchial tree," Journal of applied physiology, vol. 31, pp. 207-217, 1971.
[11]R. B. Schlesinger and M. Lippmann, "Selective particle deposition and bronchogenic carcinoma," Environmental Research, vol. 15, pp. 424-431, 1978.
[12]I. Balásházy, W. Hofmann, and T. Heistracher, "Local particle deposition patterns may play a key role in the development of lung cancer," Journal of Applied Physiology, vol. 94, pp. 1719-1725, 2003.
[13]D. Elad, R. Liebenthal, B. Wenig, and S. Einav, "Analysis of air flow patterns in the human nose," Medical and Biological Engineering and Computing, vol. 31, pp. 585-592, 1993.
[14]K. Keyhani, P. Scherer, and M. Mozell, "Numerical simulation of airflow in the human nasal cavity," Journal of biomechanical engineering, vol. 117, pp. 429-441, 1995.
[15]W. Hofmann, R. Golser, and I. Balashazy, "Inspiratory deposition efficiency of ultrafine particles in a human airway bifurcation model," Aerosol Science & Technology, vol. 37, pp. 988-994, 2003.
[16]Z. Zhang, C. Kleinstreuer, J. Donohue, and C. Kim, "Comparison of micro-and nano-size particle depositions in a human upper airway model," Journal of aerosol science, vol. 36, pp. 211-233, 2005.
[17]P. W. Longest and J. Xi, "Computational investigation of particle inertia effects on submicron aerosol deposition in the respiratory tract," Journal of Aerosol Science, vol. 38, pp. 111-130, 2007.
[18]G. Oberdörster, E. Oberdörster, and J. Oberdörster, "Nanotoxicology: an emerging discipline evolving from studies of ultrafine particles," Environmental health perspectives, pp. 823-839, 2005.
[19]S. Wang, K. Inthavong, J. Wen, J. Tu, and C. Xue, "Comparison of micron-and nanoparticle deposition patterns in a realistic human nasal cavity," Respiratory physiology & neurobiology, vol. 166, pp. 142-151, 2009.
[20]P. Zamankhan, G. Ahmadi, Z. Wang, P. K. Hopke, Y.-S. Cheng, W. C. Su, et al., "Airflow and deposition of nano-particles in a human nasal cavity," Aerosol science and technology, vol. 40, pp. 463-476, 2006.
[21]H. Kumar, M. H. Tawhai, E. A. Hoffman, and C.-L. Lin, "Steady streaming: A key mixing mechanism in low-Reynolds-number acinar flows," Physics of Fluids, vol. 23, p. 041902, 2011.
[22]N. Khajeh-Hosseini-Dalasm and P. W. Longest, "Deposition of particles in the alveolar airways: inhalation and breath-hold with pharmaceutical aerosols," Journal of aerosol science, vol. 79, pp. 15-30, 2015.
[23]K. Talaat and J. Xi, "Computational modeling of aerosol transport, dispersion, and deposition in rhythmically expanding and contracting terminal alveoli," Journal of Aerosol Science, vol. 112, pp. 19-33, 2017.
[24]Y. Fung, "A model of the lung structure and its validation," Journal of Applied Physiology, vol. 64, pp. 2132-2141, 1988.
[25]C. Richmond, "Sir Godfrey Hounsfield," ed: BMJ Publishing Group, 2004.
[26]W. A. Kalender, H. Fichte, W. Bautz, and M. Skalej, "Semiautomatic evaluation procedures for quantitative CT of the lung," Journal of computer assisted tomography, vol. 15, pp. 248-255, 1991.
[27]M. Cannie, J. Jani, F. De Keyzer, F. Van Kerkhove, J. Meersschaert, L. Lewi, et al., "Magnetic resonance imaging of the fetal lung: a pictorial essay," European radiology, vol. 18, pp. 1364-1374, 2008.
[28]A. Tsuda, N. Filipovic, D. Haberthur, R. Dickie, Y. Matsui, M. Stampanoni, et al., "Finite element 3D reconstruction of the pulmonary acinus imaged by synchrotron X-ray tomography," Journal of Applied Physiology, vol. 105, pp. 964-976, 2008.
[29]K. Khan, J. Arino, W. Hu, P. Raposo, J. Sears, F. Calderon, et al., "Spread of a novel influenza A (H1N1) virus via global airline transportation," New England journal of medicine, vol. 361, pp. 212-214, 2009.
[30]W. Yan, Y. Zhang, Y. Sun, and D. Li, "Experimental and CFD study of unsteady airborne pollutant transport within an aircraft cabin mock-up," Building and Environment, vol. 44, pp. 34-43, 2009.
[31]J. B. West and A. Luks, West's respiratory physiology: the essentials: Wolters Kluwer, 2016.
[32]L. Waite and J. M. Fine, "Applied biofluid mechanics," 2007.
[33]J. Mead, T. Takishima, and D. Leith, "Stress distribution in lungs: a model of pulmonary elasticity," Journal of Applied Physiology, vol. 28, pp. 596-608, 1970.
[34]C. Van Ertbruggen, P. Corieri, R. Theunissen, M. Riethmuller, and C. Darquenne, "Validation of CFD predictions of flow in a 3D alveolated bend with experimental data," Journal of biomechanics, vol. 41, pp. 399-405, 2008.
[35]J. Sznitman, "Respiratory flows in the pulmonary acinus and insights on the control of alveolar flows," ETH, 2008.
[36]H. Kumar, M. H. Tawhai, E. A. Hoffman, and C.-L. Lin, "The effects of geometry on airflow in the acinar region of the human lung," Journal of biomechanics, vol. 42, pp. 1635-1642, 2009.
[37]C. Darquenne, L. Harrington, and G. Prisk, "Alveolar duct expansion greatly enhances aerosol deposition: a three-dimensional computational fluid dynamics study," Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 367, pp. 2333-2346, 2009.
[38]B. Haefeli‐Bleuer and E. R. Weibel, "Morphometry of the human pulmonary acinus," The Anatomical Record, vol. 220, pp. 401-414, 1988.
[39]M. M. R. Williams and S. K. Loyalka, "Aerosol science: Theory and practice," 1991.
[40]J. D. Brain and P. A. Valberg, "Deposition of aerosol in the respiratory tract," American Review of Respiratory Disease, vol. 120, pp. 1325-1373, 1979.
[41]C. Darquenne, "Aerosol deposition in the human lung in reduced gravity," Journal of aerosol medicine and pulmonary drug delivery, vol. 27, pp. 170-177, 2014.
[42]J. Tu, K. Inthavong, and G. Ahmadi, Computational fluid and particle dynamics in the human respiratory system: Springer Science & Business Media, 2012.
[43]O. C. Zienkiewicz, R. L. Taylor, and J. Z. Zhu, "The Finite Element Method: Its Basis and Fundamentals: Its Basis and Fundamentals," Butterworth-Heinemann, vol. 132, pp. 1987-1993, 2005.
[44]O.-P. Jacquotte and G. Coussement, "Structured mesh adaption: space accuracy and interpolation methods," Computer Methods in Applied Mechanics and Engineering, vol. 101, pp. 397-432, 1992.
[45]P. G. Tucker and A. Mosquera, "Introduction to grid and mesh generation for CFD," 2001.
[46]Y. Kallinderis, A. Khawaja, and H. McMorris, "Hybrid prismatic/tetrahedral grid generation for viscous flows around complex geometries," AIAA journal, vol. 34, pp. 291-298, 1996.
[47]X. Gu, H. Schock, T. Shih, E. Hernandez, and D. Chu, "Grid-quality measures for structured and unstructured meshes," in 39th Aerospace Sciences Meeting and Exhibit, 2001, p. 652.
[48]T. L. Bergman, F. P. Incropera, D. P. DeWitt, and A. S. Lavine, Fundamentals of heat and mass transfer: John Wiley & Sons, 2011.
[49]C. Darquenne, M. Paiva, J. B. West, and G. K. Prisk, "Effect of microgravity and hypergravity on deposition of 0.5-to 3-μm-diameter aerosol in the human lung," Journal of Applied Physiology, vol. 83, pp. 2029-2036, 1997.
[50]C. G. Caro, T. Pedley, and R. Schroter, The mechanics of the circulation: Cambridge University Press, 2012.
[51]S. Haber, J. Butler, H. Brenner, I. Emanuel, and A. Tsuda, "Shear flow over a self-similar expanding pulmonary alveolus during rhythmical breathing," Journal of Fluid Mechanics, vol. 405, pp. 243-268, 2000.
[52]J. Sandeau, I. Katz, R. Fodil, B. Louis, G. Apiou-Sbirlea, G. Caillibotte, et al., "CFD simulation of particle deposition in a reconstructed human oral extrathoracic airway for air and helium–oxygen mixtures," Journal of aerosol science, vol. 41, pp. 281-294, 2010.
[53]E. R. Weibel, "Geometry and dimensions of airways of conductive and transitory zones," in Morphometry of the human lung, ed: Springer, 1963, pp. 110-135.
[54]A. Tsuda, F. S. Henry, and J. P. Butler, "Chaotic mixing of alveolated duct flow in rhythmically expanding pulmonary acinus," Journal of Applied Physiology, vol. 79, pp. 1055-1063, 1995.
[55]F. S. Henry, J. P. Butler, and A. Tsuda, "Kinematically irreversible acinar flow: a departure from classical dispersive aerosol transport theories," Journal of Applied Physiology, vol. 92, pp. 835-845, 2002.