@article { author = {Ershad, Marzie and Ahmadian, Alireza and Saberi, Houshang}, title = {Intra-operative 3D navigation and TRE reduction in image guided spine surgery}, journal = {Iranian Journal of Biomedical Engineering}, volume = {7}, number = {2}, pages = {155-162}, year = {2013}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2013.13089}, abstract = {Registration of preoperative images to intra-operative patient space is a crucial step in image guided surgery for tracking surgical tools relative to patient’s anatomy. In image guided spine surgery, due to the difference in patient’s positioning in preoperative imaging, compared with intra-operative situation, there is a difference in spine curvature in these two positioning which means that a single rigid registration is not sufficient for registering the whole spine and it is necessary for each vertebra to be registered separately as a rigid body and with it’s appropriate transformation parameters. The registration was carried out using ICP algorithm. For evaluating the registration, TRE was calculated in the pedicle of the vertebra which is the target in pedicle screw insertion. In order to optimize the TRE this study was focused on the factors affecting TRE including different configuration of landmarks used in registration and the registration algorithm. Optimal configurations for the landmarks used in the registration were proposed and FLE for the point pairs were included in the registration algorithm to increase the registration accuracy. The results indicate a total improvement of 45% in the registration accuracy by optimizing the landmarks’ configuration and the registration algorithm.}, keywords = {image guided surgery,Registration,target registration error,fiducial registration error,point based registration}, title_fa = {کاهش TRE در سیستم های ناوبری جراحی ستون فقرات}, abstract_fa = {انطباق تصاویر قبل از عمل با فضای فیزیکی بیمار در حین عمل در سیستم های راهبری جراحی به کمک تصویر، برای ردیابی ابزار جراحی نسبت به بدن بیمار امری ضروری محسوب می شود. جراحی ستون فقرات به کمک تصویر نیز از این امر مستثنی نیست. به دلیل تفاوت در نحوه قرارگیری بیمار در تصویربرداری قبل از عمل و شرایط حین عمل، تفاوتی در انحنای ستون فقرات بیمار ایجاد می شود این بدین معناست که یک انطباق صلب برای انطباق کل مهره ها کفایت نمی کند و لازم است که هر مهره بطور جداگانه به عنوان یک جسم صلب در نظر گرفته شود و عمل انطباق روی هر مهره بطور جداگانه صورت پذیرد. برای انطباق تک تک مهره ها از الگوریتم انطباق ICP استفاده شده. برای ارزیابی دقت انطباق، خطای TRE با در نظر گرفتن نقطه هدف در پایه مهره که محل جراحی در عمل جایگذاری پیچ در مهره محسوب می شود، محاسبه شد. در این تحقیق عوامل موثر بر خطای TRE که عبارتند از پیکره بندی نشانگرها نسبت به نقطه هدف، خطای FLE و الگوریتم انطباق مورد بررسی قرار گرفته است. در نهایت با پیشنهاد چند پیکره بندی مناسب از لندمارک های آناتومیکی با توجه به محدودیت های حین جراحی و همچنین در نظر گرفتن اثر FLE با استفاده از نسبت دادن وزن هایی به جفت نقاط متناظر در الگوریتم انطباق، بهبود 45 درصدی در خطای TRE حاصل شد.}, keywords_fa = {سیستم های راهبری جراحی,انطباق خطای انطباق,الگوریتم های انطباق سطح,جراحی ستون فقرات حین عمل,خطای مکان یابی نقاط}, url = {https://www.ijbme.org/article_13089.html}, eprint = {https://www.ijbme.org/article_13089_d8c571b206b5eecb375c2d39ad6e78d3.pdf} }