@article { author = {Naghavi, Nadia and Sazgarnia, Amene and Miranbaygi, Mohammad Hossein}, title = {Modeling and Simulation of PpIX Photobleaching Mechanism to Determine Its Concentration within the Target Tissue in Photodynamic Therapy}, journal = {Iranian Journal of Biomedical Engineering}, volume = {4}, number = {3}, pages = {209-218}, year = {2010}, publisher = {Iranian Society for Biomedical Engineering}, issn = {5869-2008}, eissn = {9685-8006}, doi = {10.22041/ijbme.2010.13297}, abstract = {Today, the idea of photodynamic therapy (PDT) is considered as one of the fundamental basis of the new cancer treatment methods. One of the important issues in the application of this therapy is choosing the optimal dosimetry method. At best, PDT dosimetry should be done based on estimation of the accumulated singlet oxygen dose within the target tissue and comparison with the threshold value to ensure the efficacy of the treatment. In order to estimate the accumulated singlet oxygen level within the tissue, the most appropriate method is modeling the process of treatment. In this context, it is necessary to obtain enough information about the drug concentration within the target tissue, the amount of light absorbed by the drug, the amount of oxygen into the tissue, and the interactions between them that produce singlet oxygen. In this study modeling and simulation of the photobleaching has been investigated, considering the importance of the level of drug concentration in the target tissue which would be decreased by photobleaching. Simulation was done with Matlab software. A Comparison of simulation results with those of experimental methods showed that in the state of non-uniform drug distribution, simulation follows experimental results at the initial phase of rapid decline of drug concentration.}, keywords = {Modeling,Photodynamic therapy,Photobleaching,Dosimetry,Protoporphyrin IX}, title_fa = {مدلسازی و شبیه‌سازی سازوکار فتوبلیچینگ PpIX به منظور تعیین غلظت دارو درون بافت هدف در فتوداینامیک‌تراپی}, abstract_fa = {امروزه ایده درمان فوتوداینامیک (PDT)، یکی از پایه‌های اساسی روش‌های نوین درمان سرطان به‌شمار می‌آید. موضوع حائز اهمیت در کاربرد این روش درمانی، دوزیمتری بهینه است. در حالت بهینه، بهتر است دوزیمتری PDTبر اساس تخمین دوز تجمع یافته اکسیژن یگانه درون بافت و مقایسه آن با مقدار آستانه باشد تا از نتیجه درمان اطمینان حاصل شود. مدلسازی فرایند درمان مناسب‌ترین روش برای تخمین دوز تجمع یافته اکسیژن یگانه درون بافت است. بنابراین لازم است اطلاعات کافی در مورد غلظت دارو درون بافت هدف، میزان نور جذب شده به‌وسیله دارو، میزان اکسیژن درون بافت هدف و برهمکنش بین آنها (منجر به تولید اکسیژن یگانه) به‌دست آید. با توجه به اهمیت تعیین مقدار دارو درون بافت هدف و توجه به این امر که به دلیل فتوبلیچینگ، کاهش قابل ملاحظه‌ای در غلظت دارو ضمن درمان رخ می‌دهد، در این تحقیق به مدلسازی و شبیه‌سازی اثر فتوبلیچینگ پرداخته شده است. شبیه‌سازی در فضای MATLABانجام شده است. مقایسه نتایج شبیه‌سازی با نتایج تجربی نشان می‌دهد که در حالت اعمال توزیع‌پذیری غیریکنواخت دارو، شبیه‌سازی در فاز اولیه افت سریع غلظت دارو، به‌خوبی از نتایج تجربی پیروی می‌کند.}, keywords_fa = {مدلسازی,فتوداینامیک‌تراپی,فتوبلیچینگ,دوزیمتری,پروتوپورفیرین IX}, url = {https://www.ijbme.org/article_13297.html}, eprint = {https://www.ijbme.org/article_13297_bfc5505e552fdd88b67d6060ee01a7a1.pdf} }