[[1]] Lanza R., Langer R., Vacanti J., Principles of Tissue Engineering; 3nd ed. Academic Press, San Diego. Bailey, AE, 1979.
[2] Wang M., Developing bioactive composite materials for tissue replacement; Biomaterials, 2003; 24: 2133-2151.
[3] Li W.J., Laurencin C.T., Caterson E.J., Tuan R.S., Electrospun nanofibrous structure: a novel scaffold for tissue engineering; J. Biomed Mater Res, 2002; 60: 613-621.
[4] Huang Z.M., Zhang Y.Z., Kotaki, M., Ramakaishna S., A review on nanocomposites; Comp. Sci. Tech., 2003; 63: 2223.
[6] Witte F., Hort N., Vogt C., Cohen S., Kainer K.U., Willumeit R., Degradable biomaterials based on magnesium corrosion; J. Curr.Opin.in Solid-State and Mater. Sci., 2008; 12: 63.
[7] Yun Y., Dong Z., Yong D., Schulz M., Shanov V., Biodegradable Mg corrosion and osteoblast cell culture studies; Mater.Sci. Eng. C, 2009; 29: 1814.
[8] Place E.S., George J., Williams C.K., Stevens M.M., Synthetic polymer scaffolds for tissue engineering; Chem. Soc. Rev., 2009; 38:1139.
[9] Lei Y., Rai B., Ho K., Teoh S., In vitro degradation of novel bioactive polycaprolactone–20% tricalcium phosphate composite scaffolds for bone engineering; Mater SciEng C, 2007; 27: 293.
[10] Taddei P., Tinti A., Reggiani M., Fagnano C., In vitro mineralization of bioresorbablepoly (ε-caprolactone)/apatite composites for bone tissue engineering: a vibrational and thermal investigation; J. MolStruct, 2005; 744: 135.
[1[1]] Chen B., Sun K., Mechanical and dynamic viscoelastic properties of hydroxyapatite reinforced poly(ε-caprolactone); Polym Test, 2005; 24: 978.
[[1]2] Ciapetti G., Ambrosio L., Savarino L., Granchi D., Cenni E., Baldini N., Osteoblast growth and function in porous poly ε-caprolactone matrices for bone repair: a preliminary study; Biomaterials, 2003; 24: 3815.
[[1]3] Li W., Cooper J., Mauck R., Tuan R., Fabrication and characterization of six electrospun poly([alpha]-hydroxy ester)-based fibrous scaffolds for tissue engineering applications; ActaBiomater, 2006; 2: 377.
[[1]4] Kheradmandfard M., Fathi M.H., Preparation and characterization of Mg-doped fluorapatite nanopowders by sol–gel method; Journal of Alloys and Compounds, 2010; 504: 141.
[[1]5] Bhardwaj N., Kundu S.C., Electrospinning: A fascinating fiber fabrication technique; Biotechnology Advances, 2010; 28: 325.
[[1]6] Neto W.A.R., Pereira I.H.L., Ayres E., Paula A.C.C., Averous L., Góes A.M., Oréfice R.L., Bretas R.E.S., Influence of the microstructure and mechanical strength of nanofibers of biodegradable polymers with hydroxyapatite in stem cells growth. Electrospinning, characterization and cell viability; Polymer Degradation and Stability, 2012; 97:2037.
[[1]7] Hohman M.M., Shin Y.M., Rutledge G., Brenner M.P., Electrospinning and electrically forced jets.II. Applications; Phys Fluids, 2001; 13: 2221.
[[1]8] Moghe A.K., Hufenus R. Hudson S.M., Gupta B.S., Effect of the addition of a fugitive salt on electrospinnability of poly (3-caprolactone); Polymer, 2009; 50: 3311.
[[1]9] Yang F., Both S.K., Yang X., Walboomers X. F., Jansen J.A., Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application; ActaBiomaterialia, 2009; 5: 3295.
[20] Moghe A.K., Hufenus R. Hudson S.M., Gupta B.S., Effect of the addition of a fugitive salt on electrospinnability of poly (3-caprolactone); Polymer, 2009; 50: 3311.
[21] Schueren L. V., Schoenmaker B. D., Kalaoglu O. I., Clerck, K. D., An alternative solvent system for the steady state electrospinning of polycaprolactone; European Polymer Journal, 2011; 47: 1256.
[22] Lu C., Chen P., Li, J., Zhang Y., Computer simulation of electrospinning. Part I. Effect of solvent in electrospinning; Polymer, 2006; 47: 915.
[23] Thompson C.J., Chase G.G., Yarin A.L., Reneker D.H., Effects of parameters on nanofiber diameter determined from electrospinning model; Polymer, 2007; 48: 6913.
[24] Lowery J.L., Datta N., Rutledge G.C., Effect of fiber diameter, pore size and seeding method on growth of human dermal fibroblasts in electrospun poly (3-caprolactone) fibrous mats; Biomaterials, 2010; 31: 491.
[25] Wang Y., Liu L., Guo S., Characterization of biodegradable and cytocompatible nano-hydroxyapatite/polycaprolactone porous scaffolds in degradation in vitro; Polym. Degrad. Stab., 2010; 95: 207.
[26] Johari N., Fathi M.H., Golozar M.A., Fabrication, characterization and evaluation of the mechanical properties of poly (ε-caprolactone) / nano-fluoridated hydroxyapatite scaffold for bone tissue engineering; Composites: Part B, 2012; 43: 1671.
[27] Diba M., Fathi M.H., Kharaziha M., Novel forsterite/polycaprolactone nanocomposite scaffold for tissue engineering applications; Materials Letters, 2011; 65: 1931.
[28] Yang F., Both S.K., Yang X., Walboomers X. F., Jansen J.A., Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application; ActaBiomaterialia, 2009; 5: 3295.
[29] Bianco A., Federico E.D., Moscatelli I., Camaioni A., Armentano I., Campagnolo L., Dottori M., Kenny J.M., Siracusa G., Gusmano G., Electrospun poly(ε-caprolactone)/Ca-deficient hydroxyapatite nanohybrids: Microstructure, mechanical properties and cell response by murine embryonic stem cells; Materials Science and Engineering C, 2009; 29: 2063.
[30] Wong S. C., Baji A., Leng S., Effect of fiber diameter on tensile properties of electrospun poly(ε-caprolactone); Polymer, 2008; 49, 4713.