[1] C.Bruyns, S.Senger, A.Menon, K.Montgomery, S.Wildermuth, and R.Boyle,“A survey of interactive mesh-cutting techniques and a new method for implementing generalized interactive mesh cutting using virtual tools,” The Journal of Visualization and Computer Animation, 2002, vol. 13, pp. 21–42.
[2] S. Cotin, H. Delingette, and N. Ayache, “A hybrid elastic model for real-time cutting, deformations, and force feedback for surgery training and simulation,” The Visual Computer, 2000, vol. 16, pp. 437–452.
[3] G. Picinbono, H. Delingette, and N. Ayache, “Non-linear anisotropic elasticity for real-time surgery simulation,” Graphical Models, 2003, vol. 65, pp. 305–321.
[4] A. B. Mor, “Progressive Cutting with Minimal New Element Creation of Soft Tissue Models for Interactive Surgical Simulation”. PhD thesis, The Robotics Institute,Carnegie Mellon University, Pittsburgh, PA, 2001.
[5] D., M. Harders, M. Gross, and G. Szekely, “Hybrid cutting of deformablesolids,” in Proceedings of the IEEE Virtual Virtual Reality Conference, 2006, pp. 35–42.
[6] D. Bielser, P. Glardon, M. Teschner, and M. Gross, “A state machine for real-time cutting of tetrahedral meshes,” Graphical Models, 2004, vol. 66, pp. 398–417.
[7] C. Mendoza, “Soft Tissue Interactive Simulations for Medical Applications Including 3D Cutting and Force Feedback”. PhD thesis, INRIA Rhone-Alpes, INPG,Grenoble, France, 2003.
[8] H. W. Nienhuys and A. F. van der Stappen, “A surgery simulation supporting cuts and finite element deformation,” Medical Image Computing and Computer Assisted Intervention, 2001, vol. 2208 of LNCS, pp. 153–160,
[9] D. Serby, M. Harders, and G. Szkely, “A new approach to cutting into finite element models”, in Proceedings of the 4th International Conference on Medical Image Computing and Computer-Assisted Intervention, 2001, vol. 2208, pp. 425 –433.
[10] H.-W. Nienhuys, “Cutting in deformable objects”. Ph.d. thesis, Utrecht University,2003.
[11] T. K. Huynh Quang Huy Viet and H. T. Tanaka, “An adaptive 3d surfacemesh cutting operation,” in AMDO, 2006, vol. 4069, pp. 366–374.
[12] Bielser,D., Glardon,P., Teschner,M., and Gross,M. “A state machine for real-time cutting of tetra-hedral meshes”. In Pacific Graph., 2003, pp 377–386.
[13] Forest, C., Delingette, H., and Ayache, N.. “Removing tetrahedra from manifold tetrahedralisation : application to real-time surgical simulation”. Medical Image Analysis, 2005, pp. 113–122.
[14] Serby, D., Harders, M., and Szkely, G.. “A new approach to cutting into finite element models”. In Medical Image Computing and Computer Assisted Intervention, 2001, vol. 2208, pp. 425–433..
[15] Steinemann, D., Harders, M., Gross, M., and Szekely, G. “Hybrid cutting of deformable solids”. In Proceedings of the IEEE Virtual Reality Conference, 2006, pp 425–433.
[16] Klingner BM, Shewchuk JR. “Aggressive tetrahedral mesh improvement”. In: Proceedings of the 16th international meshing roundtable, Springer, 2007,pp. 3–23.
[17] http://www.sofa-framework.org, (as of July 2013).
[18] Jeremie Allard, Stephane Cotin, Fran¸ cois Faure, Pierre-Jean Bensoussan,Fran¸ cois Poyer, Christian Duriez, Herv´ e Delingette, and Laurent Grisoni. “Sofa an open source framework for medical simulation”. In Medicine Meets Virtual Reality, 2007.
[19] U. Meier, O. Lopez, C. Monserrat, M,C. Juan, and,M. Alcaniz; “Real-time deformable models for surgery simulation: a survey”, In Computer Methods and Programs in Biomedicine, 2005 pp.183-197.
[20] J. F. Thompson, B. K. Soni, and N. P. Weatherill, eds., Handbook of grid generation, ch. 21, 1999.
[21] Han-Wen Nienhuys , A. Frank van der Stappen. “Supporting cuts and finite element deformation in interactive surgery simulation”. Institute of Information and Computing Sciences Utrecht University, The Netherlands, 2001.
[22] Hang Si. “TetGen A Quality Tetrahedral Mesh Generator and Three-Dimensional Delaunay Triangulator”, Version 1.4,User’s Manual.2006.
[23] D. Bielser, V.A. Maiwald, and M.H. Gross. “Interactive cuts through 3-dimensional soft tissue”. In Proceedings of the Eurographics ’99, 1999, vol. 18, pp. 31–38.
[24] Luis F. Gutierrez, Iker Aguinaga, Basil Fierz , Felix Ramos, Matthias Harders, “Pitting a New Hybrid Approach for Maintaining Simulation Stability after Mesh Cutting Against Standard Remeshing Strategies”, Computer Graphics International, 2011, vol. 4.
[25] Muller, M., Heidelberger, B., Teschner, M., Gross, M.: “Meshless Deformations Based on Shape Matching”. ACM Transactions on Graphics, 2005, vol. 24, pp. 471-478.