[1] Panjabi MM. Clinical spinal instability and low back pain. J Electromyogr Kinesiol. 2003;13(4):371–9.
[2] Varghese V, Kumar GS, Krishnan V. Effect of various factors on pull out strength of pedicle screw in normal and osteoporotic cancellous bone models. Med Eng Phys. 2017;40:28–38.
[3] Gibson JNA, Waddell G. Surgery for degenerative lumbar spondylosis: updated Cochrane Review. Spine (Phila Pa 1976). 2005;30(20):2312–20.
[4] Zarghooni K, Beyer F, Siewe J, Eysel P. The orthotic treatment of acute and chronic disease of the cervical and lumbar spine. Dtsch Arztebl Int. 2013;110(44):737.
[5] Kruger GO. Textbook of oral and maxillofacial surgery. Mosby St. Louis; 1984.
[6] Roy-Camille R, Saillant G, Mazel C. Internal fixation of the lumbar spine with pedicle screw plating. Clin Orthop Relat Res. 1986;(203):7–17.
[7] Boucher HH. A method of spinal fusion. J Bone Joint Surg Br. 1959;41(2):248–59.
[8] Duffy MF, Zigler JE. Lumbar Degenerative Disk Disease: Fusion Versus Artificial Disk. Best Evid Spine Surg 20 Cardinal Cases. 2012;70.
[9] Javed F, Ahmed HB, Crespi R, Romanos GE. Role of primary stability for successful osseointegration of dental implants: Factors of influence and evaluation. Interv Med Appl Sci. 2013;5(4):162–7.
[10]Atsumi M, Park S-H, Wang H-L. Methods used to assess implant stability: current status. Int J Oral Maxillofac Implants. 2007;22(5).
[11]Rouhi G, Amani Hamedani M. A BRIEF INTRODUCTION INTO ORTHOPAEDIC IMPLANTS: SCREWS, PLATES, AND NAILS. In 2012.
[12]Hashemi A, Bednar D, Ziada S. Pullout strength of pedicle screws augmented with particulate calcium phosphate: an experimental study. spine J. 2009;9(5):404–10.
[13]Thompson JD, Benjamin JB, Szivek JA. Pullout strengths of cannulated and noncannulated cancellous bone screws. Clin Orthop Relat Res. 1997;341:241–9.
[14]Abshire BB, McLain RF, Valdevit A, Kambic HE. Characteristics of pullout failure in conical and cylindrical pedicle screws after full insertion and back-out. Spine J. 2001;1(6):408–14.
[15]Vishnubhotla S, McGarry WB, Mahar AT, Gelb DE. A titanium expandable pedicle screw improves initial pullout strength as compared with standard pedicle screws. Spine J. 2011;11(8):777–81.
[16]Ninomiya K, Iwatsuki K, Ohnishi Y-I, Yoshimine T. Radiological evaluation of the initial fixation between cortical bone trajectory and conventional pedicle screw technique for lumbar degenerative spondylolisthesis. Asian Spine J. 2016;10(2):251.
[17]Brasiliense LBC, Lazaro BCR, Reyes PM, Newcomb AGUS, Turner JL, Crandall DG, et al. Characteristics of immediate and fatigue strength of a dual-threaded pedicle screw in cadaveric spines. Spine J. 2013;13(8):947–56.
[18]Ricci WM, Tornetta III P, Petteys T, Gerlach D, Cartner J, Walker Z, et al. A comparison of screw insertion torque and pullout strength. J Orthop Trauma. 2010;24(6):374–8.
[19]ASTM F543-07. Standard Specification and Test Methods for Metallic Medical Bone Screws. Annu B [Internet]. 2012;i(C):1–20. Available from: http://scholar.google.com/scholar?hl=en&btnG=Search&q=intitle:Standard+Specification+and+Test+Methods+for+Metallic+Medical+Bone+Screws#0
[20]F543-07e1 A. Standard specification and test methods for metallic medical bone screws. ASTM International West Conshohocken, PA; 2007.
[21]Westover L, Faulkner G, Hodgetts W, Raboud D. Advanced system for implant stability testing (ASIST). J Biomech. 2016;49(15):3651–9.
[22]Gehrke SA, Marin GW. Biomechanical evaluation of dental implants with three different designs: Removal torque and resonance frequency analysis in rabbits. Ann Anatomy-Anatomischer Anzeiger. 2015;199:30–5.
[23]Rokn AR, Ghahroudi AARR, Mesgarzadeh A, Miremadi AA, Yaghoobi S. Evaluation of stability changes in tapered and parallel wall implants: a human clinical trial. J Dent (Tehran). 2011;8(4):186.
[24]Quesada-García MP, Prados-Sánchez E, Olmedo-Gaya MV, Muñoz-Soto E, González-Rodríguez MP, Valllecillo-Capilla M. Measurement of dental implant stability by resonance frequency analysis: a review of the literature. Med Oral Patol Oral Cir Bucal. 2009;14(10):e538-46.
[25]Harirforoush R. Dental implant stability analysis by using resonance frequency method. Applied Science: School of Engineering Science; 2012.
[26]Bediz B, Özgüven HN, Korkusuz F. Measuring Structural Dynamic Properties of Human Tibia by Modal Testing. Biomech Clin. 2010;25(4):159–65.
[27]Mageed M, Berner D, Jülke H, Hohaus C, Brehm W, Gerlach K. Is sheep lumbar spine a suitable alternative model for human spinal researches? Morphometrical comparison study. Lab Anim Res. 2013;29(4):183–9.
[28]Cotrel Y, Dubousset J, Guillaumat M. New universal instrumentation in spinal surgery. Clin Orthop Relat Res. 1988;227:10–23.
[29]Lill CA, Schneider E, Goldhahn J, Haslemann A, Zeifang F. Mechanical performance of cylindrical and dual core pedicle screws in calf and human vertebrae. Arch Orthop Trauma Surg. 2006;126(10):686–94.
[30]Javed F, Romanos GE. The role of primary stability for successful immediate loading of dental implants. A literature review. J Dent. 2010;38(8):612–20.
[31]Inceoglu S, Ferrara L, McLain RF. Pedicle screw fixation strength: pullout versus insertional torque. spine J. 2004;4(5):513–8.
[32]Krag MH. Biomechanics of thoracolumbar spinal fixation. A review. Spine (Phila Pa 1976). 1991;16(3 Suppl):S84-99.
[33]Huang H-M, Pan L-C, Lee S-Y, Chiu C-L, Fan K-H, Ho K-N. Assessing the implant/bone interface by using natural frequency analysis. Oral Surgery, Oral Med Oral Pathol Oral Radiol Endodontology. 2000;90(3):285–91.
[34]Jarvand M, Hashemi A. The effect of particulate calcium phosphate and crushed bone augmentations on pullout strength of pedicle screws. J Biomater Tissue Eng. 2015;5(1):45–9.
[35]Mehta H, Santos E, Ledonio C, Sembrano J, Ellingson A, Pare P, et al. Biomechanical analysis of pedicle screw thread differential design in an osteoporotic cadaver model. Clin Biomech. 2012;27(3):234–40.
[36]Hitchon PW, Brenton MD, Coppes JK, From AM, Torner JC. Factors affecting the pullout strength of self-drilling and self-tapping anterior cervical screws. Spine (Phila Pa 1976). 2003;28(1):9–13.
[37]Bickley MBT, Hanel DP. Self-tapping versus standard tapped titanium screw fixation in the upper extremity. J Hand Surg Am. 1998;23(2):308–11.
[38]Sim CPC, Lang NP. Factors influencing resonance frequency analysis assessed by OsstellTM mentor during implant tissue integration: I. Instrument positioning, bone structure, implant length. Clin Oral Implants Res. 2010;21(6):598–604.
[39]Sandén B, Olerud C, Larsson S, Robinson Y. Insertion torque is not a good predictor of pedicle screw loosening after spinal instrumentation: a prospective study in 8 patients. Patient Saf Surg. 2010;4(1):14.