نوع مقاله : مقاله کامل پژوهشی
نویسندگان
1 استاد، گروه مهندسی مکانیک، دانشگاه علم و صنعت ایران، تهران
2 کارشناسی ارشد، مهندسی پزشکی گرایش بیومکانیک، دانشگاه علم و صنعت ایران، تهران
3 دانشیار، دانشکده فناوریهای نوین پزشکی، دانشگاه علوم پزشکی شهید بهشتی، تهران
چکیده
مهندسی بافت، بهعنوان روشی مناسب برای جایگزین کردن روشهای درمانی فعلی گرفتگی و تصلب شراین کرونری شناخته میشود. چالشهای اصلی در مسیر مهندسی رگهای کارآمد به کمک علم مهندسی بافت، انتخاب بیومواد و طراحی ساختار مناسب برای داربست هستند. در مطالعات اخیر نشان داده شده است که هیدروژلهای آلژینات حاوی برخی از پروتئینها مانند فیبروئین، شرایط بسیار مناسبی برای چسبندگی سلولی، فعالیتهای سلولی، گسترش و رشد سلولهای دیواره عروق خونی از خود نشان میدهند. هدف این مطالعه، بررسی قابلیت مکانیکی این هیدروژلها و امکان بهبود خواص مکانیکی آنها با تغییر ساختار شیمایی و فرآیند سنتز، برای استفاده بهعنوان داربست مهندسی بافت رگ است. در این پژوهش، پارامترهای مکانیکی مختلف هیدروژلهای آلژینات حاوی پروتئین فیبروئین، از جمله مدول کشسانی ناحیة خطی، کرنش و تنش تسلیم و قابلیت تورم داربستهای ساختهشده با این هیدروژلها، بررسی شدهاند. تمام پارامترهای ذکرشده از طریق انجام آزمون کشش تکمحوره روی نمونههای دمبلشکل و به کمک روابط تحلیلی مربوط به تنش و کرنش استوانههای جدارضخیم، بهدست آمده است. نتایج بهدستآمده، با پارامترهای مکانیکی متناظر دیوارة شریانهای کرونری مقایسه شدهاند، تا ساختار و روش سنتز بهینه از بین نمونههای آزمایششده تعیین شود. نتایج این تحقیق نشان میدهد که هیدروژل آلژینات/فیبروئین، در صورت اصلاح ساختار بهوسیلة ترکیب با هیدروژل آکریلآمید و تشکیل هیدروژل هیبرید و دوشبکهای آلژینات/فیبروئین/پلیآکریلآمید با سنتز دومرحلهای بهوسیلة کاتیونهای آهن و کلسیم، شرایط مکانیکی بسیار مناسبی برای استفاده بهعنوان داربست خواهد داشت. مدول کشسانی هیدروژل آلژینات-فیبروئین با افزودن پلیآکریلآمید، از حدود kPa 46 به kPa 100 و در صورت سنتز دومرحلهای، تا kPa 480 افزایش یافت. داربست ساختهشده با این هیدروژل، ازنظر پارامتر مکانیکی قابلیت تورم، شباهت بیشتری از رگهای پیوندی تجاری موجود به شریانهای کرونری طبیعی دارد.
کلیدواژهها
موضوعات
عنوان مقاله [English]
An Experimental Study on Alginate-Fibroin Hydrogels Mechanical Capability as Scaffolds for Vascular Tissue Engineering
نویسندگان [English]
- Mehdi Navidbakhsh 1
- Mehdi Sajjadi 2
- Simzar Hosseinzade 3
1 Professor, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
2 Master Student. School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
3 Associating Professor, School of Advanced Technologies in Medicine, Shahid Beheshti University of Medical Science, Tehran, Iran
چکیده [English]
Tissue engineering is a promising approach for developing viable alternative for current treatments of cardiovascular diseases such as autologous vessel and synthetic bypass graft transplantation. One of the major challenges in development of an applicable tissue engineered vessel is proper design of scaffold. Scaffolds are served to mimic the natural in vivo environment of cells where they interact and behave according to the mechanical cues obtained from the surrounding extracellular matrix. In recent studies alginate hydrogels containing silk fibroin protein have shown sufficient biological capability for vascular cells attachment, spreading, growth and metabolic activity. The purpose of this study was to evaluate the mechanical properties of mentioned hydrogels as scaffolds for vascular tissue engineering. Elastic modulus of linear region, yield strain and stress and compliance of three types of Alginate based hydrogel with different synthesis procedures were obtained via uniaxial tensile test of dogbone shaped specimens and thick-wall cylinders stress-strain equations. Results were compared to find the optimal formulation and synthesis process for mimicing mechanical properties of native tissue. Results of this study shows that while the proposed formulation of alginate/fibroin hydrogel lacks required mechanical stiffness, flexibility and strength; hybrid dual-network hydrogels of alginate/fibroin/polyacrylamide with a two-steps synthesis process and cross-linked by Fe3+ and Ca2+ cations promote suitable mechanical properties to be used as vascular tissue engineering scaffolds. Adding polyacrylamide to alginate-firoin hydrogels increased its elastisity modulus from 46 kPa to 480 kPa with a two step gelation process which makes it more similar to arteries wall tissue mechanically.
کلیدواژهها [English]
- Alginate Hydrogels
- Vascular Tissue Engineering
- Mechanical Properties of Hydrogels
- Polyacrylamide